首页|Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES
Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES
扫码查看
点击上方二维码区域,可以放大扫码查看
原文链接
NETL
Springer Nature
In this research, ICP-AES was used for determining ten impurity elements (Fe, Pb, Ca, Mg, Cu, Zn, Al, As, Sb, and Bi) in tin concentrate and smelting products, such as crude tin and slag。 Samples were dissolved by hydrochloric acid and nitric acid。 Determination conditions were investigated in detail。 Influences of matrix and coexisting elements were eliminated by selecting proper analysis spectral lines。 Under the optimum conditions, the correlation coefficient of calibration curves were higher than 0。999。 The detection limits of these ten impurities were in the range between 0。0009 to 0。0621 μg/ml。 Relative standard deviation (RSD) values were lower than 6。0%, and the recoveries of standard addition were between 85 and 109%。 The proposed method was demonstrated to be reliable by comparing with standard analysis methods and certified values of standard sample。 It could be applied for determining impurity elements in tin concentrate and smelting products successfully。
Inductively coupled plasma atomic emission spectrometryTin concentrateCrude tinSlagImpurity elements
Yunke Wang、Ping Long、Jian Wu、Wenli Zhang、Peipei Liu、Xinlin Ren、Bin Yang
展开 >
National Engineering Laboratory for Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, Yunnan, China
National Engineering Laboratory for Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, Yunnan, China,State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming 650093, Yunnan, China
College of Chemical Engineering, Kunming University of Science and Tecnology, Kunming 650500, Yunnan, China
Symposium on characterization of minerals, metals, and materials;TMS annual meeting & exhibition
San Diego(US)
Characterization of minerals, metals, and materials 2017