查看更多>>摘要：Cathode ablation is one of the dominant limitations for extending the maximum operating time of arc heaters.In this work,the arc ablation behaviors and mechanisms of commercial CuCr10,CuCr25,and CuCr50 cathodes were investigated for pure copper and pure chromium cathodes.The discharging homo-geneity was improved with the increase of chromium content in the cathodes,which was attributed to the formed chromic oxide layer.The CuCr50 cathodes exhibited the lowest ablation rate with a reduction of 27.0％ compared to the copper cathodes.The chromic oxide formed in the pit protected the bottom matrix,leading to a homogeneous ablation process.The mechanism for the improved homogeneous ablation behaviors of the CuCr50 cathodes was proposed and featured by the suppression of deep pits and the dispersion of arc foot.Future attention will be focused on designing composite cathodes with an anti-ablation surface layer and a good conductive matrix.
查看更多>>摘要：β-type titanium alloys have attracted much attention as implant materials because of their low elastic modulus and high strength,which is closer to human bones and can avoid the problem of stress fielding and extend the lifetime of prosthetics.However,other issues,such as the infection or inflammation postimplantation,still trouble the titanium alloy's clinical application.In this paper,we developed a novel near β-titanium alloy (Ti-13Nb-13Zr-13Ag,TNZA) with low elastic modulus and strong antibacterial ability by the addition of Ag element followed by proper microstructure controlling,which could reduce the stress shielding and bacterial infections simultaneously.The microstructure,mechanical properties,corrosion resistance,antibacterial properties and cell toxicity were studied using SEM,electrochemical testing,mechanical test and cell tests.The results have demonstrated that TNZA alloy exhibited an elastic modulus of 75-87 GPa and a strong antibacterial ability (up to 98 ％ reduction) and good biocompatibility.Moreover,it was also shown that this alloy's corrosion resistance was better than that of Ti-13Nb-13Zr.All the results suggested that Ti-13Nb-13Zr-13Ag might be a competitive biomedical titanium alloy.
查看更多>>摘要：It is a big challenge to construct large-scale,high-resolution and high-performance inkjet-printed metal oxide thin film transistor (TFT) arrays with independent gates for the new printed displays.Here,a self-confined inkjet printing technology has been developed to construct large-area (64 × 64 array),high-resolution and high-performance metal oxide bilayer (In2O3/IGZO) heterojunctionTFTs with independent bottom gates on transparent glass substrates.Inkjet printing In2O3 dot arrays with the diameters from 55 to 70 μm and the thickness of ～10 nm were firstly deposited on UV/ozone treated AIOx dielectric layers,and then IGZO dots were selectively printed on the top of In2O3 dots by self-confined technology to form In2O3/IGZO heterojunction channels.When the inkjet-printed IO layers treated by UV/ozone for more than 30 min or oxygen plasma for 5 min prior to print IGZO thin films,the mobility of the resulting printed In2O3/IGZO heterojunction TFTs are correspondingly enhanced to be 18.80 and 28.44 cm2 V-1 s-1 with excellent on/off ratios (＞108) and negligible hysteresis.Furthermore,the printed N-Metal-Oxide-Semiconductor (NMOS) inverter consisted of an In2O3/IGZO TFT and an IGZO TFT has been demonstrated,which show excellent performance with the voltage gain up to 112.The strategy demonstrated here can be considered as general approaches to realize a new generation of high-performance printed logic gates,circuits and display driving circuits.
查看更多>>摘要：Precipitation strengthening is an effective approach to enhance the strength of soft magnetic alloys for applications at high temperatures,while inevitably results in deterioration in coercivity due to the pinning effect on the domain wall movement.Here,we realize a good combination of high-temperature strength and ductility (ultimate tensile strength of 564 MPa and elongation of ～ 20 ％,respectively) as well as low coercivity (6.97 Oe) of FeCo-2V-0.3Cr-0.2Mo soft magnetic alloy through introducing high-density magnetic nanoprecipitates.The magnetic nanoprecipitates are characterized by FeCo-based phase with disordered body-centered cubic structure,whichenables the alloy to have a low coercivity.In addition,these nanoprecipitates can impede the dislocation motion and suppress the brittle fracture,which lead to a high tensile strength and ductility.This work provides a guideline to enhance strength and ductility while maintaining low coercivity in soft magnetic alloys via magnetic nanoprecipitates.
查看更多>>摘要：Electromagnetic interference (EMI) shielding materials with ultrathin,flexible,superior mechanical and thermal management properties are highly desirable for smart and wearable electronics.Here,ultrathin and flexible Ni/Cu/metallic glass/Cu/Ni (Ni/Cu/MG) multilayer composite with alternate magnetic and electrical structures was designed via facial electroless plating of Cu and Ni on an Fe-based metallic glass.The resultant 0.02 mm-thick Ni/Cu/MG composite displays a superior EMI shielding effectiveness (EMISE)of 35 dB and a great EMISE/t of 1750 dB/mm,which is greater than those of composites with monotonous multilayer or homogeneous structures.The improved EMI SE originates from the massive ohmic losses,the enhanced internal reflection/absorption,and the abundant interfacial polarization loss.Particularly,Ni/Cu/MG exhibits a high tensile strength of up to 1.2 GPa and outstanding mechanical stability,enabling the EMI SE remains unchanged after 10,000 times of bending.Moreover,Ni/Cu/MG has excellent Joule heating characteristics and thermal stability,which is very suitable for heating components of wearable hyperthermia devices.
查看更多>>摘要：In this work,we reported a new strategy to improve the nonlinear saturable absorption performance of magnetite (Fe3O4) nanoparticles (FONPs) via the compositional engineering with the Ti3C2 MXene in the near-infrared (NIR) region.Based on the DFT simulation,the band structures and work function were significantly modified by the Ti3C2 MXene doping.By using the open-aperture Z-scan technology,the nonlinear optical features of the FONPs@Ti3C2 nanocomposite were significantly improved,show-ing the great potential as the saturable absorber in the pulsed laser.With the nanocomposite as the saturable absorber,the passively Q-switched Nd∶GdVO4 lasers emitted much shorter pulse durations when compared with the pristine FONP saturable absorber.These findings indicated that FONPs@Ti3C2 heterostructure was a promising saturable absorber for the short pulse generation in the NIR region.
查看更多>>摘要：Public safety incidents caused by bacterial infections have attracted widespread attention towards antibacterial textiles (fibers,fabrics,etc.).Nevertheless,it is still challenging to efficiently load inor-ganic nano-antibacterial materials in polymer fibers.In this work,zirconium phosphate (ZrP,layered micro-nano materials) was utilized as a micro-nano carrier.The octadecyl triphenyl phosphonium bro-mide (OTP) was intercalated between the ZrP sheets by the ion exchange method to improve the carrier-polymer compatibility and the antibacterial performance.Through in-situ chemical reduction,the ultra-small nano-sized cuprous oxide (Cu2O ＜ 5 nm) was loaded on the outer surface of ZrP to realize the uniform and stable dispersion of the Cu2O on the carrier and improve the antibacterial performance.The ZrP nanosheets loaded with Cu2O and OTP (Cu2O@OZrP) had excellent antibacterial properties,and the antibacterial rate against E.coli,S.aureus and C albicans was more than 99 ％.The intercalation amount of OTP in Cu2O@OZrP can reach 16 ％,and the thermal stability was excellent and a significant increase in the Zeta potential.Indeed,the decomposition temperature was greater than 350 ℃,which was suitable for high-temperature melt processing of polymers.Consequently,we prepared PET/Cu2O@OZrP fibers using polyethylene glycol terephthalate (PET),which accounts for 70 ％ of the total chemical fibers,as the fiber matrix.PET/Cu2O@OZrP fibers exhibited excellent mechanical property and antibacterial per-formance when the content of Cu2O@OZrP was only 0.2 ％.The antibacterial rate against five types of bacteria including super bacteria (MRSA,VRE) was more than 99 ％.
查看更多>>摘要：Laser powder bed fusion (L-PBF) was utilized to produce specimens in Ti-6Al-4V,which were subjected to a bi-lamellar heat treatment,which produces microstructures consisting of primary α-lamellae and a fine secondary α-phase inside the inter-lamellar β-regions.The bi-lamellar microstructure was obtained as (i)a direct bi-lamellar heat treatment from the asbuilt condition or (ii) a bi-lamellar heat treatment preceded by a β-homogenization.For the bi-lamellar treatment with β-homogenization,cooling rates in the range 1-500 K/min were applied after homogenization in β-region followed by inter-critical annealing in the α + β region at various temperatures in the range 850-950 ℃.The microstructures were characterized using various microscopical techniques.Mechanical testing with Vickers hardness indentation and tensile testing was performed.The bi-lamellar microstructure was harder when compared to a soft fully lamellar microstructure,because of the presence of fine α-platelets inside the β-lamellae.Final low temperature ageing provided an additional hardness increase by precipitation hardening of the primary α-regions.The age hardened bi-lamellar microstructure shows a similar hardness as the very fine,as-built martensitic microstructure.The bi-lamellar microstructure has more favorable mechanical properties than the as-built condition,which has high strength,but poor ductility.After the bi-lamellar heat treatment,the elongation was improved by more than 250 ％.Due to the very high strength of the as-built condition,loss of tensile strength is unavoidable,resulting in a reduction of tensile strength of～18 ％.
查看更多>>摘要：Tumor-associated macrophages (TAMs) play an important role in tumor development and progression.In particular,M2 TAMs can promote tumor growth by facilitating tumor progression and malignant behav-iors.Selectively targeted elimination of M2 TAMs to inhibit tumor progression is of great significance for cancer treatment.Iron oxide nanoparticles based magnetic hyperthermia therapy (MHT) is a classical approach to destroy tumor tissue with deep penetration depth.In this study,we developed a typical M2 macrophage-targeted peptide (M2pep) functionalized superparamagnetic iron oxide nanoparticle(SPIO) for magnetic resonance imaging (MRI)-guided MHT in an orthotopic breast cancer mouse model,The obtained multifunctional SPIO-M2pep with a hydrodynamic diameter of 20 nm showed efficient targeting capability,high transverse relaxivity (149 mM-1 s-1) and satisfactory magnetic hyperthermia performance in vitro.In vivo studies demonstrated that the SPIO-M2pep based MRI can monitor the distri-bution of nanoparticles in tumor and indicate the suitable timing for MHT.The M2 macrophage-targeted MHT significantly reduced the tumor volume and the population of pro-tumoral M2 TAMs in tumor.In addition,the SPIO-M2pep based MHT can remodel the tumor immune microenvironment (TIME).The multifunctional SPIO-M2pep with M2 macrophage-targeting ability,high magnetic hyperthermia effi-ciency,MR imaging capability and effective role in remodeling the TIME hold great potential to improve clinical cancer therapy outcomes.
查看更多>>摘要：Mg-Zn-Nd alloy is a promising biodegradable metal material for surgical staples during the reconstruc-tion of digestive tract due to its good biocompatibility and suitable mechanical properties.However,its deformation property and corrosion resistance should be improved to make better safety and effective-ness of staples.In the present study,bi-direction drawing was adopted to maintain the initial texture characteristics,and improve mechanical property and corrosion resistance of Mg-2Zn-0.5Nd alloy.The results showed that the microstructure after bi-direction did not change too much,but the texture could maintain its initial characteristics.The ductility of the alloy with 60 ％ accumulative area reduction after bi-direction drawing was increased by 70 ％,indicating that an outstanding deformation property of Mg-Zn-Nd alloy can be obtained by bi-direction drawing.The corrosion resistance was also improved after bi-direction drawing compared with that under single direction drawing.
NETL
NSTL
维普
万方数据