查看更多>>摘要：Macro-microscopic tectonic analysis and lithologic features show that the gold-bearing breccia bodies in the Shuangwang gold deposit, for hydrofracturing of the deep-sourced and alkali-rich fluids in the Devonian sodic rock series, are identified as hydrofracturing breccia bodies. Since the Indosinian,intracontinental collisional orogenesis results in multiple fracturings and magmatic emplacements in the Qinling area. Deep-sourced fluids resulting from deep fractures and granitoid magmatic intrusion are of a supercritical nature. Joint action between the fluid-rock system and structures leads to hydroffacturing and ore formation of the gold deposit.Firstly, the progressive coaxial compression caused the competent sodic rock series and the incompetent pelitic rock series to be deformed and partitioned. Lens-like weak-strain domains are hence formed and distributed at the approximate equidistance zones and the linear strong-strain zones,respectively. Subsequently, the progressive non-coaxial shearing and right-lateral and high-angle oblique thrusting lead to the most developed fracture system in the core of the weak-strain domain to turn from compression to extension and to link up with the deep fracture systems. The periodical huge pressure decline in the pumping center causes the deep-sourced confined fluids to develop periodic tectonic pumping, hydrofracturing and precipitation-healing in the sodic rock series. The gold-bearing hydrofracturing breccia bodies are hence ultimately formed at near-equidistance tectonic lenses. On the basis of the above model, the predicted concealed gold-bearing hydrofracturing breccia bodies have been preliminarily validated by latest drillings.
查看更多>>摘要：There occur abundant cherts in the Mesozoic and Cenozoic strata in southern Tibet. Some of them possess characteristic hydrothermal structures such as layered, laminated, massive and breccia structures.Ratios of Al/(Al+Fe+Mn), Co/Ni, Fe/Ti and TiO2-Al2O3 demonstrate that their origin is related to hydrothermal sedimentation. The chert formations have close relationship with Sb, Au and poly-metallic mineralization, and the ore-forming fluid show strong correlation with fossil hydrothermal water.
查看更多>>摘要：Based on a systematic analysis about the design principles, systematic objectives, clients' demands and functional modules of the regional karst desertification disaster information system, a systematic application plan was proposed in this paper that the mainstream technologies like COMGIS, etc. can be used for secondary development, and Du'an Yao Autonomous County of Guangxi was taken as an example to illustrate the application of geographical information system in development of karst desertification disaster information system, and to provide a feasible plan for realization of accessory decision information aiming for sustainable development ofkarst desertification area.
查看更多>>摘要：The pressure gradient of the lithosphere is a key to explaining various geological processes, and varies also in time and space similar to the geothermal gradient. In this paper a correlation formula of geothermal gradients and pressure gradients was built with the thermocomprestion coefficients. Based on this formula, the article has studied the relation between the pressure gradients and the geothermal gradients in the lithosphere, and the results indicate that the pressure gradient in the lithosphere is nonlinear, and its minimum value is the lithostatic gradient, and that the pressure gradient of the lithosphere will increase obviously with the contribution of both geothermal and gravity, and could be twice times more than the lithostatic gradient.
WANG YongshengZHU GuangWANG DaoxuanLIU Guosheng...
139-151页
查看更多>>摘要：The Tan-Lu fault zone joins the Dabie Mountains on its eastern margin, and offsets the Dabie and Sulu orogenic belts sinistrally for about 500 km. On the basis of calculation of temperature and pressure experienced by the two phases of the fault zone as well as the thermo-chronological information on mylonite from the earlier and later Tan-Lu fault zones on the eastern margin of the Dabie Mountains, this paper discusses the delamination history and uplifting magnitudes of the Dabie Mountains from earlier Jurassic to earlier Cretaceous. From mineral assemblages, mineral deformation and muscovite-chlorite geothermometry calculation, it is known that the temperature experienced by the two phases of Tan-Lu fault zones are between 400℃ and 450℃, and the confining pressures are between 0.25Gpa and 0.36GPa for the earlier shear zones and 0.24-0.39GPa for the late shear zones. According to the geobarometry of Si-in-phengite and by considering shear heating and tectonic over-pressure, it is concluded that the maximum formation depths for the two phases of the ductile shear zones are not more than 12 km.Differential formation depths for the two phases of shear zones are 1-2 km at most. At about 190 Ma and 128 Ma, the Tan-Lu fault zone experienced two phases of cooling events. During this period, the eastern margin of the Dabie Mountains experienced a tectonic calm period and no uplifting. According to information from the Tan-Lu fault zone, the uplifting magnitudes of the Dabie orogenic belts are not more than 12 km during the earlier Cretaceous.
查看更多>>摘要：The platinum-group element geochemistry of rocks and ores from Jinchuan super-large copper-nickel sulfide deposit is systemically studied in this paper. The Cu/Pd mean ratio of Jinchuan intrusion is lower on is lower than that of original mantle magma, which indicates that these ultrabasic rocks were crystallized from t Pd in the form of melting segregation of sulfides. The PGE of the rocks show trend of partial melting, similar to that of mantle peridotite, which shows that magma formation occurs during cks and ores are well related to each other, which signifies the signatures of multi-episode magmatic intrusion, melting and iation in the formation processes of rocks and ores. In addition, analyses about the relation between PGE and S, and study on Re-Os isotopes indicate that few contamination of the crustal substances crustal substances helps to supply part of the S for the enrichment of PGE. Meanwhile, the hydrothermal process advantageous for the enrichment of PGE, especially for Pt and Pd, due to deep melting segregation.The characteristic parameters (such as Pt/(Pt+Pd), (Pt+Pd)/(Ru+Ir+Os), Pd/lr, Cu/(Ni+Cu), and so on.) for platinum-group elements for Jinchuan sulfide copper-nickel deposit show the same features as those for sulfide copper-nickel deposit related to basic magma, which also illustrates its original magma property representative of Mg-high tholeiite. Therefore, it is the mafic (not ultramafic) magma that resulted in the formation of the superlarge sulfide copper-nickel deposit enriched in Cu and PGE. To sum up, the geochemical characteristics of platinum-group elements in rocks and ores from Jinchuan copper-nickel sulfide deposit are constrained by the continental riff tectonic environment, the parent magma features, the enriched mantel magma source, the complex metallogenesis and PGE geochemical signatures, and thiswould be rather significant for the study about the genetic mechanism of copper-nickel sulfide deposits.
查看更多>>摘要：Mineralisation is the result of the coupled multi-geodynamic processes in the crust. The coupled mechano-thermo-hydrological (MTH) processes are the basic physical processes that govern the location of the hydrothermal mineralization, which can be simulated in the computer by using of the numerical codes, such as FLAC. The numerical modeling results can be used not only to explain the features of existing ore deposits, but also to predict the favorable mineralization locations. This paper has summarized the basic equations describing coupled MHT processes in the water-saturated porous rocks, the principles of FLAC, and its application to the MHT processes related to copper mineralization in the Fenghuangshan ore field. We used the FLAC to simulate the syn-deformation cooling and fluid flowing evolution after the intrusion was emplaced and solidified. The modeling results suggest a most prospective exploration area where the subsequent exploration supported the prediction and the test bore hole disclosed the high quality copper ore bodies in the target, demonstrating a positive role of the numerical MTH modeling in facilitating predictive ore discovery.
查看更多>>摘要：The characteristics of the Triassic sequences developed in the Lower Yangtze area display some great changes in both environment and climate. The change of environment was a transition from marine to continent via alternating environments. The change of climate was a transition from tropic (torrid) to warm and wet climate via subtropic dry climate. The type variations of the sequences were from the marine sequences to the continental sequences, corresponding to the changes of environments and climates.Sequence 1 is a type Ⅱ of sequence of mixed clastic and carbonate sediments; sequence 2 is a type Ⅰ of sequence of carbonate platform; sequence 3 is a type Ⅰ of sequence of carbonate tidal flat-salt lagoon,sequence 4 is a type Ⅱ of sequence of lacustrine within marine layers, and sequence 5 is a sequence of lacustrine-swamp. The development, distribution and preservation of those sequences reveal the tectonic controls and their changes in the background. The collision between the Yangtze plate and the North China plate was a great geological event in the geological history, but the timing of the collision is still disputed.However, the characteristics of Triassic sequence stratigraphy and sea level changes in the Lower Yangtze area responded to this coliision. The collision started at the beginning of middle Triassic and the great regression in the Lower Yangtze area started 22Ma earlier than those in the world. The tectonic conditions occurred before and during the collision controlled the development of sequences and type changes.
NETL
NSTL
万方数据
维普