北京口腔医学2014,Vol.22Issue(1) :27-29.

可切削瓷贴面厚度及粘接剂对变色牙遮色效果的影响

Effect of different machinable veneer thickness and adhesives on the opacity for discolored tooth

李丹 白保晶 张振庭
北京口腔医学2014,Vol.22Issue(1) :27-29.

可切削瓷贴面厚度及粘接剂对变色牙遮色效果的影响

Effect of different machinable veneer thickness and adhesives on the opacity for discolored tooth

李丹 1白保晶 1张振庭2
扫码查看

作者信息

  • 1. 100050 北京 首都医科大学口腔医学院王府井部修复科
  • 2. 100050 北京 首都医科大学口腔医学院王府井部特诊特需科
  • 折叠

摘要

目的 研究CAD/CAM可切削陶瓷贴面厚度与粘接剂颜色双重因素对变色牙修复后颜色效果的影响.方法 用C4色复合树脂制作基底板模拟重度变色牙,将5种不同厚度的A1色可切削陶瓷片标准件(厚度分别为0.50mm、0.75mm、1.00mm、1.25mm及1.50mm)与6种不同颜色的试色糊剂(A4、opaque white、A1、A3、BleachXL010、Transparent)混合搭配,分别置于基底板上共30种组合作为实验组,测量其L*、a*、b*值及A-D (VITA)色系结果.计算每种组合与基底板之间的色差值⊿E,进行统计学分析.结果 30种组合与基底板之间的色差值(⊿E)均大于1.5NBS,有肉眼可辨的颜色差异.30种组合中,除1.25-op-基及1.5-op-基的色系为A色系外,其余各组的色系结果均为C或D色系.结论 当瓷贴面达到一定厚度且所用糊剂含有遮色成分时,色系结果有明显变化.通过CAD/CAM瓷贴面厚度及试色糊剂颜色的不同组合,能对重度变色牙的遮色效果进行一定程度的调整.

Abstract

Objective To evaluate the effect of the combination of different thickness CAD/CAM machinable veneer and adhesives on the opacity for discolored tooth.Methods The substrate board was made by Shade C4 composite resin to mimic discolored tooth.The veneers were sliced from Shade A1 machinable ceramic blocks (Vita Mark Ⅱ) into different thickness (0.50mm,0.75mm,1.00mm,1.25mm,1.50mm).Six colors (A4,opaque white,A1,A3,Bleach XL010,Transparent) of try-in paste(Variolink2) were used as luting adhesives.Thirty test samples were obtained through the combination of different thickness veneer and adhesives.The sample color was measured by digital colorimeter (Shade Eye-NCC) recorded as coordinate values(L*,a*,b*) of the CIE Lab system and A-D shade value(VITA).The color differences(/ E) between each sample group and substrate were calculated and analyzed.Results The Delta E between each sample group and substrate was all greater than 1.5NBS and the color difference was perceivable by naked eyes.A-D shade value changed only in thick veneer and opaque adhesive sample groups.Conclusion Discolored tooth may be esthetically restored with acceptable shade by the combination of proper thick CAD/CAM porcelain veneer and opaque adhesives.

关键词

CAD/CAM瓷贴面/颜色效果/Shade/Eye-NCC比色仪

Key words

CAD/CAM porcelain laminate veneer/Esthetic effect/Shade Eye-NCC

引用本文复制引用

出版年

2014
北京口腔医学
首都医科大附属北京口腔医院,北京口腔医学会

北京口腔医学

CSTPCD
影响因子:0.603
ISSN:1006-673X
被引量3
参考文献量5
段落导航相关论文