基于往复式磁流变抛光磨粒轨迹分析
Analysis of Abrasive Particle Trajectory based on Reciprocating Magnetorheological Polishing
张红宁 1王任胜 1杨光 2陈默 1李珉贤 1秦梓铭1
作者信息
- 1. 辽宁科技学院 机械工程学院,辽宁 本溪117004
- 2. 本溪客运集团有限公司,辽宁 本溪117000
- 折叠
摘要
在往复式磁流变抛光过程中为获得光滑均匀的工件,文章采用加工磨粒轨迹分析法,通过对不同参数下磨粒运动轨迹的仿真分析,研究等速和变速两种往复运动工况下磨粒运动轨迹对工件加工质量的影响.结果表明,在变速往复运动条件下,加工磨粒运动轨迹更为复杂,更容易获得光滑均匀的工件.
Abstract
In order to obtain smooth and uniform workpiece in the process of reciprocating magnetorheological polishing,the abrasive particle trajectory analysis method is used in this paper.The influence of abrasive motion trajectory on workpiece machining quality un-der two reciprocating motion conditions of constant speed and variable speed is studied through simulation analysis under different pa-rameters.The results show that under the condition of variable speed reciprocating motion,the trajectory of the abrasive particle is more complicated,which is beneficial for obtaining a smooth and uniform workpiece.
关键词
磁流变抛光/等速和变速/磨粒轨迹/仿真分析Key words
Reciprocating magnetorheological polishing/Constant speed and variable speed/Abrasive particle trajectory/Simulation analysis引用本文复制引用
基金项目
辽宁省教育厅面上项目(LJKMZ20221681)
辽宁科技学院大学生创新创业项目(202411430021)
营口市企业博士双创计划项目()
出版年
2024
NETL
NSTL
万方数据