材料科学技术(英文版)2021,Vol.90Issue(31) :205-224.

Effect of thermo-mechanical processing parameters on the dynamic restoration mechanism in an Mg-4Y-2Nd-1Sm-0.5Zr alloy during hot compression

Yunwei Gui Lingxiao Ouyang Yibei Xue Quanan Li
材料科学技术(英文版)2021,Vol.90Issue(31) :205-224.

Effect of thermo-mechanical processing parameters on the dynamic restoration mechanism in an Mg-4Y-2Nd-1Sm-0.5Zr alloy during hot compression

Yunwei Gui 1Lingxiao Ouyang 2Yibei Xue 3Quanan Li4
扫码查看

作者信息

  • 1. School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471023,China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology,Luoyang 471023,China;Department of Materials Processing,Graduate School of Engineering,Tohoku University,6-6-11 Aoba,Aramaki,Aoba-ku,Sendai,980-8579,Japan
  • 2. Department of Materials Processing,Graduate School of Engineering,Tohoku University,6-6-11 Aoba,Aramaki,Aoba-ku,Sendai,980-8579,Japan
  • 3. School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China
  • 4. School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471023,China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology,Luoyang 471023,China
  • 折叠

Abstract

Microstructure evolution and dynamic restoration mechanism of solution-treated Mg-4Y-2Nd-1Sm-0.5Zr alloy have been studied under three TMP parameters consisting of deformation temperatures (350-500 ℃),strain rates (0.01-5 s-1),and strains (0.2,0.4,and 0.8).A strong dynamic softening is observed in all stress-strain curves,even at higher strain rates (1 and 5 s-1) due to an adiabatic heating effect.Various stress-strain curves are applied to construct a processing map and develop an Arrhenius-type constitutive equation.With the prediction of the processing map,an optimal processing domain has been determined to be the temperature range 450-500 ℃ and strain rate range 0.01-0.1 s-1 at a strain of 0.8.The volume fraction of DRX grains is the largest in the corresponding domain of high temperature and low strain rate.For the effect of TMP parameters on the dynamic restoration,the discontinuous dynamic recrystallization(DDRX) and continuous DRX (CDRX) synergistic effect occur throughout the whole process at high tem-perature and high strain rate.In terms of high temperature and low strain rate,DDRX characteristics at a low strain and then the DDRX + CDRX synergistic effect is observed at a higher strain.Although the DRX process is weak at low temperature and low strain rate,deformation twins have occurred and provided nucleation sites for DRX grains.

Key words

Mg-RE alloy/TMP parameters/Processing map prediction/Constitutive analysis/Dynamic restoration mechanism

引用本文复制引用

基金项目

National Natural Science Foundation of China(51571084)

China Scholarship Council(201908410208)

出版年

2021
材料科学技术(英文版)
中国金属学会 中国材料研究学会 中国科学院金属研究所

材料科学技术(英文版)

CSTPCDCSCDSCI
影响因子:0.657
ISSN:1005-0302
参考文献量77
段落导航相关论文