材料科学技术(英文版)2021,Vol.95Issue(36) :225-236.

Low-temperature superplasticity of β-stabilized Ti-43Al-9V-Y alloy sheet with bimodal γ-grain-size distribution

Yu Zhang Shuai Chang Yuyong Chen Yuchao Bai Cuiling Zhao Xiaopeng Wang Jun Min Xue Hao Wang
材料科学技术(英文版)2021,Vol.95Issue(36) :225-236.

Low-temperature superplasticity of β-stabilized Ti-43Al-9V-Y alloy sheet with bimodal γ-grain-size distribution

Yu Zhang 1Shuai Chang 2Yuyong Chen 3Yuchao Bai 1Cuiling Zhao 1Xiaopeng Wang 2Jun Min Xue 2Hao Wang1
扫码查看

作者信息

  • 1. Department of Mechanical Engineering,Faculty of Engineering,National University of Singapore,9 Engineering Drive 1,Singapore 117575,Singapore
  • 2. Department of Materials Science and Engineering,Faculty of Engineering,National University of Singapore,9 Engineering Drive 1,Singapore 117576,Singapore
  • 3. State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,Harbin 150001,China;National Key Laboratory for Precision Hot Processing of Metals,Harbin Institute of Technology,Harbin 150001,China
  • 折叠

Abstract

The superplasticity of Ti-43Al-9V-0.2Y alloy sheet hot-rolled at 1100 ℃ was systematically investigated in the temperature range of 750-900 ℃ under an initial strain rate of 10-4 s-1.A bimodal γ grain-distribution microstructure of TiA1 alloy sheet,with abundant nano-scale or sub-micron γ laths embed-ded inside β matrix,exhibits an impressive superplastic behaviour.This inhomogeneous microstructure shows low-temperature superplasticity with a strain-rate sensitivity exponent of m =0.27 at 800 ℃,which is the lowest temperature of superplastic deformation for TiAl alloys attained so far.The maximum elongation reaches ~360% at 900 ℃ with an initial strain rate of 2.0 × 10-4 s-1.To elucidate the softening mechanism of the disordered β phase during superplastic deformation,the changes of phase composi-tion were investigated up to 1000 ℃ using in situ high-temperature X-ray diffraction (XRD) in this study.The results indicate that β phase does not undergo the transformation from an ordered L20 structure to a disordered A2 structure and cannot coordinate superplastic deformation as a lubricant.Based on the microstructural evolution and occurrence of both y and β dynamic recrystallization (DR) after tensile tests as characterized with electron backscatter diffraction (EBSD),the superplastic deformation mecha-nism can be explained by the combination of DR and grain boundary slipping (GBS).In the early stage of superplastic deformation,DR is an important coordination mechanism as associated with the reduced cavitation and dislocation density with increasing tensile temperature.Sufficient DR can relieve stress concentration arising from dislocation piling-up at grain boundaries through the fragmentation from the original coarse structures into the fine equiaxed ones due to recrystallization,which further effectively suppresses apparent grain growth during superplastic deformation.At the late stage of superplastic de-formation,these equiaxed grains make GBS prevalent,which can effectively avoid intergranular cracking and is conducive to the further improvement in elongation.This study advances the understanding of the superplastic deformation mechanism of intermetallic TiAl alloy.

Key words

Titanium aluminides/Hot-rolled alloy sheet/Bimodal microstructure/In situ high-temperature XRD/Superplasticity

引用本文复制引用

基金项目

Singapore Ministry of Education Academic Research Funds(R-265-000-686-114)

Singapore Ministry of Education Academic Research Funds(MOE2018-T2-1-140)

出版年

2021
材料科学技术(英文版)
中国金属学会 中国材料研究学会 中国科学院金属研究所

材料科学技术(英文版)

CSTPCDCSCDSCI
影响因子:0.657
ISSN:1005-0302
参考文献量44
段落导航相关论文