首页|硅负极黏结剂对锂离子电池性能的影响

硅负极黏结剂对锂离子电池性能的影响

扫码查看
为考察负极黏结剂对锂离子电池性能的影响,分别以丁苯橡胶(SBR)、改性SBR、苯乙烯丙烯酸酯(SA)为负极黏结剂,制备锂离子电池,并对电池的性能进行评估.SA黏结剂在内阻、低温放电及循环性能上优于传统的SBR黏结剂.在25℃下,SA黏结剂制备电池的直流内阻为 28.68 mΩ,比 SBR 黏结剂制备的电池下降了 22.08%;-20℃下则下降了26.26%.与SBR黏结剂制备的电池相比,在 2.8~4.2 V充放电,SA黏结剂制备电池以1.0 C(2.3 A)放电,-20℃与25℃容量之比提高 10.78 个百分点;25℃下以 2.2 C快充循环 700 次,容量保持率提高 9.3 个百分点.
Effect of silicon anode binder on the performance of Li-ion battery
In order to investigate the effect of anode binder on the performance of Li-ion battery,the electrochemical performance of battery is evaluated,which is prepared with styrene butadiene rubber(SBR),modified SBR and styrene acrylate(SA)as anode binder,respectively.SA binder has better performance than SBR binder in internal resistance,low temperature discharge and cycle performance.The direct current resistance(DCR)of battery with SA as anode binder is 28.68 mΩ at 25℃,which is 22.08%lower than that with SBR binder,and it is 26.26%lower at-20℃.Compared with the battery prepared with SBR binder,the capacity ratio at-20 ℃ to 25 ℃ of the battery prepared with SA binder discharged at 1.0 C(2.3 A)in 2.8-4.2 V is increased by 10.78 percentage points.The capacity retention rate is increased by 9.3 percentage points after 700 fast charging cycles at 2.2 C at 25 ℃.

Li-ion batterybinderstyrene butadiene rubber(SBR)styrene acrylate(SA)fast charge cycleparticle agglomeration

吴军、邱申、胡庆波、徐艳辉

展开 >

联翼(泰兴)新能源有限公司,江苏 泰州 225400

苏州大学钢铁学院,江苏 苏州 215006

锂离子电池 黏结剂 丁苯橡胶(SBR) 苯乙烯丙烯酸酯(SA) 快充循环 颗粒团聚

2024

电池
全国电池工业信息中心 湖南轻工研究院

电池

CSTPCD北大核心
影响因子:0.336
ISSN:1001-1579
年,卷(期):2024.54(3)