首页|重金属螯合吸附剂的制备和吸附性能研究

重金属螯合吸附剂的制备和吸附性能研究

扫码查看
采用CS2、C3H5ClO等原料制备螯合吸附材料HDTC,用于探究吸附剂在废水中对Zn2+、Pb2+离子的吸附性能,采用SEM、BET和FTIR等表征手段对HDTC进行分析,对比传统吸附剂活性炭等,其具有较好的孔隙结构,其孔径与比面积达到28.0892nm、36.87m2/g.同时考察不同温度、pH条件下HDTC对Zn2+、Pb2+的吸附效果.结果表明,在pH为5~6、温度45 ℃条件下,HDTC对Zn2+、Pb2+的饱和吸附量分别为368.9和435.3mg/g,对Zn2+、Pb2+的吸附过程满足二级动力学方程和Langmuir吸附等温模型.
Study on the preparation and adsorption properties of heavy metal chelating adsorbent
The chelating adsorption material HDTC was prepared by using CS2、C3H5ClO and other raw materials to explore the adsorption performance of the adsorbent for Zn2+and Pb2+ions in wastewater.In this paper,SEM,BET and FTIR were used to analyze HDTC.Compared with traditional adsorbents such as activated carbon,it has better pore structure,and its pore size and specific area reach 28.0892 nm and 36.87 m2/g.At the same time,the adsorption effect of HDTC on Zn2+and Pb2+under different temperature and pH conditions was investigated.The results showed that the saturated adsorption capacities of HDTC for Zn2+and Pb2+were 368.9 and 435.3 mg/g,respectively,under the conditions of pH 5~6 and temperature 45 ℃.The adsorption process of Zn2+and Pb2+satisfied the second-order kinetic equation and Langmuir adsorption isotherm model.

heavy metalchelatingadsorptionzinclead

严炜鑫、王一鸣、蔡建刚、穆金鑫、李忠玉、张雨哲、韩晓刚

展开 >

常州大学环境科学与工程学院,江苏常州 213164

常州清流环保科技有限公司,江苏常州 213144

重金属 螯合 吸附

2024

电镀与精饰
天津市电镀工程学会

电镀与精饰

CSTPCD北大核心
影响因子:0.522
ISSN:1001-3849
年,卷(期):2024.46(9)