首页|高速飞行器热防护结构非均匀热流载荷反演方法

高速飞行器热防护结构非均匀热流载荷反演方法

扫码查看
原文链接
  • 万方数据
  • 维普
为准确掌握高速飞行器热防护结构服役时承担的非均匀气动热载荷,提出了一种基于共轭梯度理论的非均匀热流载荷的反演方法.以隔热瓦结构为例,开展了2类典型非均匀热流载荷下的数值仿真研究.通过引入一阶样条曲线插值表征非均匀热流的时变规律,降低了待反演参数数量.分析了反演方法的可行性以及温度测量偏差等因素对反演精度的影响.研究结果表明:非均匀热流时变规律的样条线表征方法可以将反演参数数量缩减到4个,极大地提升了反演效率;提出的反演方法可以精确反演结构非均匀热流载荷的时间和空间分布特性,对于含噪声的测量数据,该方法由于采用了插值重构的表征方法而体现出较好的抗噪性能.
Inversion method of non-uniform heat flux load of thermal protection structure for high-speed aircraft
To accurately grasp the non-uniform aerodynamic thermal load borne by the thermal protection structure of high-speed aircraft in service,an inversion method of non-uniform heat flow load was proposed based on the conjugate gradient theory.Two kinds of typical non-uniform heat flow loads were studied using the heat insulation tile structure as an example.By introducing first-order spline curve interpolation to charac-terize the time-varying law of non-uniform heat flow,the number of parameters to be inverted was reduced.The feasibility of the inversion method was analyzed,and the influence of temperature measurement deviations on inversion accuracy was studied.The results show that the number of inversion parameters can be reduced to 4 using the time-varying spline characterization method,which greatly improves the inversion efficiency.The proposed inversion method can accurately invert the time and space distribution characteristics of the non-uni-form heat flow load.For the measurement data containing noise,it shows good anti-noise performance due to the use of interpolation reconstruction characterization method.

thermal protection structurespline curveconjugate gradient methodthree-dimensional non-uni-form temperature field

沈冬、马晗、陈强、李彦斌、费庆国

展开 >

东南大学机械工程学院,南京 211189

东南大学高速飞行器结构与热防护教育部重点实验室,南京 211189

热防护结构 样条曲线 共轭梯度法 三维非均匀温度场

国家自然科学基金国家自然科学基金国家自然科学基金江苏省自然科学基金江苏省科技厅重点研发产业前瞻项目东南大学"仲英青年学者"项目

521252095217522052302514BK20211558BE2022158

2024

10.3969/j.issn.1001-0505.2024.02.023

东南大学学报(自然科学版)
东南大学

东南大学学报(自然科学版)

CSTPCD北大核心
影响因子：0.989
ISSN：1001-0505
年,卷(期)：2024.54(2)
  • 16