低温与特气2024,Vol.42Issue(5) :35-36,54.DOI:10.3969/j.issn.1007-7804.2024.05.007

共沉淀法制备甲醇裂解催化剂及其性能参数

Preparation of Methanol Cracking Catalyst by Co-precipitation Method and Its Performance Parameter

代茂节 李洁 徐晓峰 张棣
低温与特气2024,Vol.42Issue(5) :35-36,54.DOI:10.3969/j.issn.1007-7804.2024.05.007

共沉淀法制备甲醇裂解催化剂及其性能参数

Preparation of Methanol Cracking Catalyst by Co-precipitation Method and Its Performance Parameter

代茂节 1李洁 2徐晓峰 1张棣1
扫码查看

作者信息

  • 1. 西南化工研究设计院有限公司,四川 成都 610225
  • 2. 中国工业气体工业协会 氢气专业委员会,河北 邯郸 056027
  • 折叠

摘要

对甲醇催化裂解制一氧化碳铜基催化剂的制备方法进行了研究,采用共沉淀法制备了一系列改性Cu-Zn-Al催化剂,用Ni改性催化剂中的活性组分Cu,并对催化剂的催化性能进行了考察.实验结果表明,在铜锌铝镍质量比为45∶45∶5∶5、pH值为7.5 条件下制得的催化剂在反应温度为300℃时活性最佳.此时CO转化率为90.5%,选择性为96.39%.

Abstract

The preparation method of copper-based catalysts for catalytic cracking of methanol to carbon monoxide was stud-ied.A series of modified Cu-Zn-Al catalysts were prepared by co-precipitation method,and the active component Cu in the catalysts was modified by Ni,and the catalytic performance of the catalysts was investigated.The experimental results show that the catalyst prepared under the conditions of Cu-Zn-Al-Ni mass ratio of 45∶45∶5∶5 and pH 7.5 has the best activity at 300℃.At this time,the conversion of CO is 90.5%and the selectivity is 96.39%.

关键词

催化裂解/共沉淀/铜基催化剂

Key words

catalytic cracking/co-precipitation/copper-based catalysts

引用本文复制引用

出版年

2024
低温与特气
光明化工研究设计院

低温与特气

影响因子:0.232
ISSN:1007-7804
段落导航相关论文