快锻压机主缸壁厚设计研究
Research on structural design of main cylinder of fast forging machine
刘旭明 1张鸿飞 1贾鋆 1贾晓亮 1李晶2
作者信息
- 1. 兰州兰石重工有限公司,甘肃 兰州 730314;甘肃省金属塑性成形装备智能控制重点实验室,甘肃 兰州 730314;甘肃省大型快锻液压设备技术创新中心,甘肃 兰州 730314
- 2. 兰州兰石集团有限公司能源装备研究院,甘肃 兰州 730314
- 折叠
摘要
分析了传统不同设计方法对缸壁厚度的影响;针对某吨位快锻液压机主缸工作情况,简化得出主缸缸筒受力模型;基于拉美公式,分析缸筒壁厚对缸筒所受的径向及切向应力的影响变化规律;与传统主缸设计方法所设计的油缸进行应力、应变及壁厚对比得出,基于拉美公式法设计的油缸,不仅刚度及刚度可靠,而且壁厚较传统方法所设计的油缸较小.
Abstract
In this paper,firstly the influence of different traditional design methods on cylinder wall thickness is analyzed. Then according to the working condition of the main cylinder of the fast forging hydraulic press,the stress model of the main cylinder is simplified,and then based on Latin American formula,the influ-ence of the cylinder wall thickness on the radial and tangential stress of the cylinder is analyzed. Then,by comparing the stress,strain and wall thickness with the cylinder designed by the traditional master cylinder design method,it is concluded that the cylinder designed by Latin American stress method is not only reli-able in stiffness and stiffness,but also smaller in wall thickness than that designed by the traditional method.
关键词
快锻液压机/主缸/壁厚设计/拉美公式/有限元Key words
Fast Forging Machine/Main cylinder/Latin American formula/Finite element引用本文复制引用
出版年
2024
NETL
NSTL
万方数据