首页|高锰铝青铜合金组织转变规律研究

高锰铝青铜合金组织转变规律研究

Study on microstructure transformation of high manganese aluninum bronze alloy

扫码查看
高锰铝青铜(ZCuAl8Mn14Fe3Ni2)合金中Mn(13.5~15%)、Al(7.8~8.8%)、Fe(2.8~4.0%)、Ni(1.8~2.5%),各合金成分对组织转变均有影响.为方便研究,基于Al当量对比分析不同成分合金的相析出行为;通过连续升温试验研究组织演变规律及各相溶解情况.结果表明:各相析出温度受材料成分影响显著,高Al当量试样中α相析出温度较低;在连续升温试验中,β精细分解相在高温加热时可发生回溶,α相在700℃时完全溶解;加热温度高于800℃时,材料中只有基体β相和未溶解κⅠ相.
Mn (13.5~15%),Al (7.8~8.8%),Fe (2.8~4.0%) and Ni (1.8~2.5%) in high manganese alu-minum bronze alloy (ZCuAl8Mn14Fe3Ni2) all have effects on the microstructure transformation. In order to facilitate the study,the phase precipitation behavior of alloys with different components is comparatively ana-lyzed based on Al equivalent. The microstructure evolution law and dissolution of each phase were studied by continuous heating test. The results show that the precipitation temperature of each phase is significantly affected by the material composition,and the precipitation temperature of α phase in high Al equivalent samples is lower. In the continuous heating test,the β fine decomposition phase can be redissolved when heated at high temperature,and the α phase can be completely dissolved at 700℃. When the heating tem-perature is higher than 800℃,there are only matrix β phase and undissolved κⅠ phase in the material.

High manganese aluninum bronzePhase precipitation behaviorPhase dissolution behavior

刘鑫、杨俊峰、范芳雄、杨慧慧、杨顺皓、王灵水

展开 >

中船双瑞(洛阳)特种装备股份有限公司,河南 洛阳 471000

宁波博威合金材料股份有限公司,浙江 宁波 315000

高锰铝青铜 相析出行为 相溶解行为

2024

锻压装备与制造技术
中国机床工具工业协会 济南铸造锻压机械研究所有限公司

锻压装备与制造技术

影响因子:0.345
ISSN:1672-0121
年,卷(期):2024.59(4)