水基喷雾造粒制备高导热球形氮化铝填料
Preparation of high thermal conductivity spherical aluminum nitride fillers by water-based spray granulation
赵东亮 1秦明礼 2鲁慧峰2
作者信息
- 1. 河北中瓷电子科技股份有限公司,石家庄 050200
- 2. 北京科技大学新材料技术研究院,北京 100083
- 折叠
摘要
氮化铝(AlN)因具有优异的导热能力和电绝缘性,是热界面材料中导热填料的理想材料.本文首先对AlN粉末进行表面改性,提高了AlN粉体的抗水解能力,然后采用水基溶剂进行喷雾造粒,在浆料配置过程中对球磨时间、添加剂用量等工艺参数进行了优化,制备了球形度高的AlN生坯,最后经脱脂烧结,制备出具有低氧含量、高球形度及高导热性的AlN填料.研究表明,磷酸改性后的AlN粉体在 16h球磨过程中可保持良好的抗水解能力.粘结剂含量(质量分数)对喷雾造粒后的生坯形状有明显影响,采用 2%PVB+2%PEG粘结剂制备的粉末具有良好的球形度与表面光滑程度.经过脱脂烧结,AlN陶瓷微球的热导率和抗弯强度分别达到 171.2 W·m-1·K-1 和 340 MPa,具有良好的流动性.综上所述,水基喷雾造粒制备的球形AlN适合用作热界面材料的导热填料.
Abstract
Aluminum nitride(AlN)is an ideal material for the thermally conductive fillers in thermal interface materials due to its excellent thermal conductivity and electrical insulation.The surface modification of the AlN powders was firstly carried out to improve the hydrolysis resistance of AlN powders in this paper,then the spray granulation was carried out using the water-based solvents.The process parameters,such as ball milling time and binder dosage,were optimized during the slurry configuration.The AlN spherical fillers with high sphericity were prepared.Finally,the AlN fillers with low oxygen content,high sphericity,and high thermal conductivity were fabricated by debinding and sintering.In the results,the phosphoric acid-modified AlN powders can maintain the good hydrolysis resistance after the ball milling for 16 h.The binder content(mass fraction)has the significant effect on the green shape after the spray granulation.The powders prepared with 2%PVB+2%PEG binders show the good sphericity and surface smoothness.After debinding and sintering,the thermal conductivity and flexural strength of the AlN ceramic microspheres reach 171.2 W·m-1·K-1 and 340 MPa,respectively,showing the good fluidity.In conclusion,the water-based spray granulation is suitable for the preparation of high thermal conductivity spherical aluminum nitride fillers.
关键词
氮化铝填料/热界面材料/喷雾造粒/脱脂烧结Key words
aluminum nitride fillers/thermal interface materials/spray granulation/degreasing sintering引用本文复制引用
基金项目
河北省省级科技计划资助项目(20311001D)
出版年
2024
国家科技期刊平台
NSTL
万方数据