首页|印染污泥脱水车间PM10与PM2.5质量浓度分析

印染污泥脱水车间PM10与PM2.5质量浓度分析

扫码查看
夏秋两季对两个典型的污泥脱水车间(CY和HT)采集大气颗粒样品,对PM10与PM2.5质量浓度进行分析.结果表明,通风性较差的HT点的PM10与PM2.5污染严重,超过《环境空气质量标准》(GB3095-2012)规定2至3倍;颗粒物浓度季节变化规律:秋季>夏季;PM2.5/PM10比值在0.5以上,表明颗粒物以PM2.5为主;CY点通风好,利于室内颗粒物排放;HT点通风差,不利于室内颗粒物排放.HT点应改善通风设备,保障工人生命健康安全.
Concentration Level of PM10and PM2.5in Sludge Dewatering Plant
In summer and autumn, atmospheric particles of two typical sludge dewatering workshops (CY and HT) were collected, and the concentration of PM10 and PM2.5 was analyzed. The results showed that PM10 and PM2.5 of HT points which with poor ventilation rate were seriously polluted, exceeding the limit value of "environmental air quality standards" (gb3095-2012).Seasonal variation of concentration: summer>autumn; the PM2.5/PM10 ratio is above 0.5, indicating that PM2.5 is the main pollutant. The CY point is well ventilated to facilitate indoor particulate emission; HT point ventilation is not conducive to indoor particulate emission. HT points should improve ventilation equipment to ensure workers' health and safety.

atmospheric particulatesSludge Dewatering PlantPM10PM2.5

骆献达、万全、魏子凯

展开 >

广东工业大学 环境科学与工程学院,广东 广州 510006

大气颗粒物 印染污泥脱水车间 PM10 PM2.5

2018

广东化工
广东省石油化工研究院

广东化工

影响因子:0.288
ISSN:1007-1865
年,卷(期):2018.45(8)
  • 4