首页|生物质型材的燃烧特性研究

生物质型材的燃烧特性研究

扫码查看
本文通过热重分析法研究了生物质型材的燃烧特性,得出了生物质型材燃料的热失重曲线和热微分失重曲线,并通过公式拟合计算给出了相应的活化能和频率因子数值。从曲线还可以发现生物质燃烧的着火温度在280℃左右,当温度达到304℃时燃烧反应的反应速率最大。这说明生物质型材着火点低,活化能相对较高。为了保证生物质在气化炉中燃烧时为了有足够的产气量和较高的气化效率,氧化层的温度应保持在900℃左右,还原层的温度应保持在 700℃左右,可以为生物质气化炉的优化设计提供了理论依据。
Study on the Combustion Characteristics of Biomass Profiles
In this paper,the combustion characteristics of biomass profile were studied by Thermogravimetric analysis,and the thermogravimetric curve and thermos-differential weight loss curve of biomass profile fuel were obtained.From the curve,it can also be observed that the ignition temperature of biomass combustion is around 280℃,and the reaction rate of the combustion reaction is the highest when the temperature reaches 304℃.This indicates that biomass profiles have a low ignition point and relatively high activation energy.In order to ensure sufficient gas production and high gasification efficiency when biomass is burned in the gasifier,the temperature of the oxidation layer should be maintained at around 900℃,and the temperature of the reduction layer should be maintained at around 700℃.This provides a theoretical basis for the optimization design of the biomass gasifier.

thermogravimetric analysisthermal weight loss curvethermal differential weight loss curveactivation energyfrequency factor

刘杰成、朱光羽、刘效洲

展开 >

普宁市广业环保能源有限公司,广东 揭阳 515326

广东工业大学 材料与能源学院,广东 广州 510006

热重分析法 热失重曲线 热微分失重曲线 活化能 频率因子

2024

广东化工
广东省石油化工研究院

广东化工

影响因子:0.288
ISSN:1007-1865
年,卷(期):2024.51(8)