四英寸半导体含氟废水处理工程案例
Four-inch Semiconductor Fluorine-containing Wastewater Treatment Engineering Case
徐占营1
作者信息
- 1. 上海朗蔚环保科技有限公司,上海 201600
- 折叠
摘要
江苏某半导体公司产生的含氟废水种类比较复杂,有低浓度含氟废水和高浓度含氟废水.为了达到处理要求,将高浓度废水单独处理,处理后的水用于配置氢氧化钙药剂,然后和低浓度废水混合后再处理.低浓度含氟废水通过两级除氟达到污水综合排放标准中的三级排放标准.
Abstract
The types of fluoride wastewater produced by a semiconductor company in Jiangsu province are relatively complex,including low concentration fluoride wastewater and high concentration fluoride wastewater.In order to meet the treatment requirements,the high concentration wastewater is treated separately,and the treated water is used to configure the calcium hydroxide agent,and then mixed with the low concentration wastewater before treatment.The low concentration fluoride wastewater reaches the three-level discharge standard in the comprehensive sewage discharge standard through the two-level fluoride removal.
关键词
四英寸半导体/氟废水/化学沉淀/pH控制Key words
four-inch semiconductors/fluoride wastewater/chemical precipitation/pH control引用本文复制引用
出版年
2024
NETL
NSTL
万方数据