工具技术2024,Vol.58Issue(2) :102-104.DOI:10.3969/j.issn.1000-7008.2024.02.018

QPQ处理对3J21弹性合金性能的影响

Effect of QPQ Treatment on Properties of 3J21 Alloy

汪辉 谢明强 王强 贾喜庆 文灿 李孔军 甘倩容
工具技术2024,Vol.58Issue(2) :102-104.DOI:10.3969/j.issn.1000-7008.2024.02.018

QPQ处理对3J21弹性合金性能的影响

Effect of QPQ Treatment on Properties of 3J21 Alloy

汪辉 1谢明强 1王强 1贾喜庆 1文灿 1李孔军 1甘倩容1
扫码查看

作者信息

  • 1. 成都工具研究所有限公司
  • 折叠

摘要

以3J21弹性合金作为研究对象,采用570℃的QPQ工艺对3J21合金进行不同时长的处理,研究QPQ处理对其性能的影响.通过维氏显微硬度计、光学显微镜、XRD衍射分析仪分别检测了 3J21处理后的表面维氏显微硬度、断面维氏显微硬度、渗氮层厚度和相结构组成.结果表明:3J21合金经QPQ处理后,表面硬度得到了显著提升;断面硬度随着QPQ处理的时间延长,下降趋势变缓;渗氮层深度随着处理时间的延长而增加;通过XRD衍射图谱观察到,由于渗层浅,各相衍射峰强度较低,主要由α"相、Ni3N、CrN和Co2N等固溶相构成渗层.

Abstract

In this paper,3J21 elastic alloy is used for 570℃ salt bath nitride to study the effect of QPQ treatment on its performance.The surface microvicker hardness,cross-section microvicker hardness,nitrous layer thickness,and phase structure composition are respectively analyzed after 3J21 treatment by microvickometer,optical microscope,and XRD dif-fraction analyzer.The results show that the surface hardness of alloy 3J21 is significantly improved after QPQ treatment,the result of the XRD diffraction spectrum shows that the low diffraction strength of each phase is mainly composed of α"phase,Ni3N,CrN and Co2N.

关键词

3J21弹性合金/QPQ处理/显微组织/表面硬度/相结构

Key words

3J21 alloy/QPQ treatment/microtissue/surface hardness/phase structure

引用本文复制引用

出版年

2024
工具技术
成都工具研究所

工具技术

CSTPCD北大核心
影响因子:0.147
ISSN:1000-7008
参考文献量6
段落导航相关论文