Research on Cutting Force of High Strength Steel in High Efficiency Milling
In the range of cutting speed v=100～300m/min,feed rate fz=0.01～0.1mm/z,axial cutting depth ap=1～3mm,the high efficiency milling experiments on 30CrNi2MoVA high strength steel are carried out,and the influence of cutting parameters on cutting force is studied.The results show that the cutting speed has little effect on the change of cut-ting force.With the increase of cutting speed,the radial force increases slightly and the tangential force decreases slightly.The axial cutting depth and feed rate have great influence on the change of cutting force.The radial force and tangential force increase linearly with the increase of axial cutting depth and feed rate,and the increase amplitude is large.The axial force changes little with the cutting parameters,and the axial force has little difference under different cutting parameters.Within the range of test cutting parameters,the overall performance is radial force＞tangential force＞axial force.
high strength steelcutting forcecutting parameterhigh efficiency milling
万方数据
维普
