首页|三相导电混凝土掺料配比研究及评价

三相导电混凝土掺料配比研究及评价

扫码查看
以钢纤维(Steel Fibre,SF)、碳纤维(Carbon Fibre,CF)、纳米炭黑(Nano-Carbon Black,NCB)为导电掺料,基于正交试验方法设计试验,测量每组配比下试件的电阻率与抗压强度,并采用层次分析法和灰色关联度法进行评价.结果表明,三相导电混凝土试件电阻率随 SF、CF 和 NCB 掺量的增加而降低;抗压强度随 SF、CF掺量的增加而增加,而NCB反之;其中CF对电阻率和抗压强度的影响均最为显著.当SF、CF和NCB掺量分别为 0.6%、0.3%(体积分数)和 0.6%(质量分数)时导电混凝土达到渗流阈值;而综合评价后可知,当 SF、CF 和NCB掺量分别为 0.9%、0.7%(体积分数)和 0.6%(质量分数)时导电混凝土性能最好,其抗压强度提升 31.8%,电阻率降低 98.9%.
Research and evaluation on the proportioning of three phase conductive concrete
Based on the orthogonal experiments,using carbon fiber,steel fiber,and nano carbon black as ad-mixtures,the resistivity and compressive strength of specimens at each mix ratio were measured,and the re-sults were evaluated using the analytic hierarchy process and grey correlation method.The research results indi-cated that the resistivity increases with the increase of CF,SF,and NCB content.The compressive strength in-creases with the increase of CF and SF content,and decreases with the increase of NCB content.CF has the most significant impact on electrical resistivity and compressive strength.The percolation thresholds of conduc-tive concrete in the experiment are at CF,SF,and NCB dosages of 0.6 v%,0.3 v%and 0.6 w%,respectively.The comprehensive evaluation results showed that the conductive concrete has the best performance when the CF,SF,and NCB dosages are 0.9 v%,0.7 v%,and 0.6 w%,respectively,with a compressive strength in-crease of 31.8%and a resistivity decrease of 98.9%compared to the blank group.

carbon fibresteel fibrenano-carbon blackresistivitycompressive strengthgrey correlation method

陈宁萱、胡少伟、田锌如

展开 >

重庆大学 土木工程学院,重庆 400000

郑州大学 黄河实验室,郑州 450001

碳纤维 钢纤维 纳米炭黑 电阻率 抗压强度 灰色关联度

国家自然科学基金重点项目国家重点研发计划项目重庆市创新研究群体科学基金项目

521309012022YFC3004400cstc2020jcyjcxttX0003

2024

功能材料
重庆材料研究院 中国仪器仪表学会仪表材料学会

功能材料

CSTPCD北大核心
影响因子:0.918
ISSN:1001-9731
年,卷(期):2024.55(3)
  • 23