首页|铜锌多金属矿选锌尾矿再选铜工艺的超细磨优化研究

铜锌多金属矿选锌尾矿再选铜工艺的超细磨优化研究

Study on Optimization of Ultrafine Grinding Process for Re-Copper Separation of Zinc Tailings from Copper-Zinc Polymetallic Mine

扫码查看
研究了超细磨粒度和浓度对选锌尾矿再选铜指标的影响.通过在不同的超细磨粒度(80%-32μm、80%-29 μm、80%-20 μm、80%-15 μm)和不同的超细磨浓度(38%、43%、47%)下进行浮选试验,揭示了超细磨粒度的减小,总体上提高了铜精矿的Cu品位,尤其在80%-20 μm时达到最优,品位为3.96%,回收率为29.02%.超细磨过磨会导致回收率降低.超细磨浓度的增加对铜精矿品位和回收率产生显著影响,其中43%的超细磨浓度表现出最佳的铜回收效果.
The effects of ultrafine grinding size and concentration on the re-copper index of zinc tailings were studied.Flota-tion tests at different ultrafine grinding sizes(80%-32 μm,80%-29 μm,80%-20 μm,80%-15 μm)and different ul-trafine grinding concentrations(38%,43%,47%)revealed that the reduction of ultrafine grinding size increased the Cu grade of copper concentrate in general.Especially at 80%-20 μm,the grade is 3.96%and the recovery is 29.02%.Ultra-fine grinding can lead to reduced recovery.The increase of ultrafine grinding concentration has a significant effect on the grade and recovery of copper concentrate,of which 43%grinding concentration shows the best copper recovery effect.

copper-zinc polymetallic oreflotationultrafine grindingzinc tailingsreconcentration of copper

林炜

展开 >

紫金矿业集团股份有限公司,福建 上杭 364200

铜锌多金属矿 浮选 超细磨 选锌尾矿 铜再选

2024

甘肃冶金
甘肃省金属学会,西北矿冶研究院

甘肃冶金

影响因子:0.176
ISSN:1672-4461
年,卷(期):2024.46(2)
  • 5