首页|Water modeling on fluid flow and mixing phenomena in a BOF steelmaking converter
Water modeling on fluid flow and mixing phenomena in a BOF steelmaking converter
扫码查看
点击上方二维码区域，可以放大扫码查看
原文链接
NETL
NSTL
万方数据
A 1∶8 physical water model was constructed to investigate the fluid flow and mixing phenomena in the basic oxygen furnace(BOF)converter.The particle image velocimetry was employed to measure the velocity distribution of the bath and the high-speed camera was applied to capture the cavity shape in the combined blowing BOF converter.The mixing time for varied operating conditions was measured by the stimulus-response approach.The cavity depth increased with the decrease in the lance height and the increase in the top gas flow rate while the bottom blowing gas had little influence on the cavity depth.The minimum cavity depth was obtained under the condition of a 69.8 m3/h top gas flow rate,a 287.5 mm lance height and a 0.93 m3/h bottom blowing gas flow rate,which was 161.2 mm.The mixing time decreased as the lance height decreased and the top blowing gas flow rate increased.The mixing time was first decreased and then increased with the increase in the bottom gas flow rate.With the condition of 69.8 m3/h gas flow rate of top blowing,the 287.5 mm lance height and the 0.93 m3/h gas flow rate of bottom blowing,the mixing time in the converter was 48.65 s.The empirical formula between the stirring power and the mixing time in the converter was calculated.
Water modelFluid flowParticle image velocimetryMixing timeBOF converter
NETL
NSTL
万方数据
