工业催化2024,Vol.32Issue(7) :59-65.DOI:10.3969/j.issn.1008-1143.2024.07.011

Fe-In复合氧化物催化剂的制备及其催化苯酚甲基化性能

Preparation and catalytic performance of Fe-In based composite oxides catalyst for phenol methylation

张书贤 翟新阳 郭佳 翟德伟 田卢兵
工业催化2024,Vol.32Issue(7) :59-65.DOI:10.3969/j.issn.1008-1143.2024.07.011

Fe-In复合氧化物催化剂的制备及其催化苯酚甲基化性能

Preparation and catalytic performance of Fe-In based composite oxides catalyst for phenol methylation

张书贤 1翟新阳 2郭佳 1翟德伟 2田卢兵1
扫码查看

作者信息

  • 1. 浙江芳原馨生物医药有限公司,浙江 绍兴312000
  • 2. 浙江医药股份有限公司昌海生物分公司,浙江 绍兴312000
  • 折叠

摘要

通过共沉淀、老化、洗涤、干燥、焙烧、粉碎、成型等步骤制备一种Fe-In复合氧化物催化剂并用于催化苯酚气相烷基化制邻甲基苯酚.考察制备温度、终点pH值及活性组分物质的量比对催化剂晶相、孔结构及催化活性的影响.结果表明,当制备温度为55℃,终点pH值为约8.5,n(Fe):n(In):n(Cr):n(Al)=100:2:1:1时,催化剂性能最佳,邻甲酚收率41.1%.采用该催化剂制备邻甲基苯酚,选择性高,且工艺过程简单,适宜连续化大规模生产.

Abstract

Fe-In composite oxide catalyst was prepared by co precipitation,aging,washing,drying,calcina-tion,crushing,and shaping,and used for catalyzing the gas-phase alkylation of phenol to produce o-meth-ylphenol.The effects of preparation temperature,end point pH value,and the molar ratio of active compo-nent substances on the crystal phase,pore structure,and catalytic activity of the catalyst were investig-ated.The results showed that when the preparation temperature was 55 ℃,the end point pH value was about 8.5,and n(Fe):n(In):n(Cr):n(Al)=100∶2∶1∶1,the catalyst performance was optimal,with o-cresol yield of 41.1%.The use of this catalyst to prepare ortho methylphenol has high selectivity and a simple process,making it suitable for continuous large-scale production.

关键词

催化剂工程/氧化铁/氧化铟/氧化铬/苯酚邻位烷基化

Key words

catalyst engineering/iron oxide/indium oxide/chromium oxide/ortho alkylation of phenol

引用本文复制引用

出版年

2024
工业催化
西北化工研究院

工业催化

CSTPCD
影响因子:0.504
ISSN:1008-1143
段落导航相关论文