工业计量2024,Vol.34Issue(1) :1-4.DOI:10.13228/j.boyuan.issn1002-1183.2022.0392

红外体温检测手环的温度补偿研究

Study on temperature compensation of infrared temperature detection bracelet

禹鑫鹏 贺庆 刘佳镕 王林瑶
工业计量2024,Vol.34Issue(1) :1-4.DOI:10.13228/j.boyuan.issn1002-1183.2022.0392

红外体温检测手环的温度补偿研究

Study on temperature compensation of infrared temperature detection bracelet

禹鑫鹏 1贺庆 1刘佳镕 1王林瑶2
扫码查看

作者信息

  • 1. 北京信息科技大学仪器科学与光学工程学院,北京 100192
  • 2. 湖北工程学院文学与新闻传播学院,湖北孝感 432000
  • 折叠

摘要

精准的腕部可穿戴测温设备,对于健康检测、疾病防控具有重大意义.外界环境因素对红外测温传感器的测量干扰较大,需要进行温度补偿.为此,设计一款基于MLX90614的红外体温检测手环,并对其温度补偿方法进行分析与研究.对环境温度、测量距离等因素进行实验,建立了腋下温度、腕部温度、环境温度之间的数学模型.最终证明该方法能够良好修正腕部温度的测量误差,在一定的环境温度范围内,最大温度偏差不超过 0.1 ℃.

Abstract

Accurate wrist wearable temperature measuring equipment is of great significance for health detection and disease prevention and control.External environmental factors have great interference on the measurement of infrared temperature sensor,so temperature compensation is needed.Therefore,an in-frared temperature detection bracelet based on MLX90614 is designed,and its temperature compensation method is analyzed and studied.The mathematical model of armpit temperature,wrist temperature and environment temperature was established.Finally,it is proved that the method can correct the measure-ment error of wrist temperature well,and the maximum temperature deviation is not more than 0.1 ℃ within a certain range of ambient temperature.

关键词

红外测温/腕部测温/温度补偿/可穿戴设备/环境温度/测温距离

Key words

infrared temperature measurement/wrist temperature measurement/temperature compensa-tion/wearable devices/ambient temperature/temperature measurement distanc

引用本文复制引用

基金项目

北京市教委科技一般项目(KM201911232019)

北京市教委科技一般项目(KM202011232008)

国家自然科学基金(9011723201)

北京市自然科学基金青年基金(4214080)

出版年

2024
工业计量
冶金自动化研究设计院 中国计量协会

工业计量

影响因子:0.256
ISSN:1002-1183
参考文献量13
段落导航相关论文