合成橡胶工业2024,Vol.47Issue(1) :18-21.DOI:10.19908/j.cnki.ISSN1000-1255.2024.01.0018

环氧化溶聚丁苯橡胶改性的溶聚丁苯橡胶/白炭黑复合材料的性能

Properties of solution polymerized styrene-butadiene rubber/silica composites modified by epoxidized solution polymerized styrene-butadiene rubber

肖同畅 李翔宇 曲晓 杜爱华
合成橡胶工业2024,Vol.47Issue(1) :18-21.DOI:10.19908/j.cnki.ISSN1000-1255.2024.01.0018

环氧化溶聚丁苯橡胶改性的溶聚丁苯橡胶/白炭黑复合材料的性能

Properties of solution polymerized styrene-butadiene rubber/silica composites modified by epoxidized solution polymerized styrene-butadiene rubber

肖同畅 1李翔宇 1曲晓 2杜爱华1
扫码查看

作者信息

  • 1. 青岛科技大学 高分子科学与工程学院,山东青岛 266042
  • 2. 赛轮集团股份有限公司,山东青岛 266042
  • 折叠

摘要

将环氧度为15%的环氧化溶聚丁苯橡胶作为改性剂,研究了环氧化溶聚丁苯橡胶对溶聚丁苯橡胶/白炭黑复合材料的加工性能、物理机械性能、动态力学性能及白炭黑分散性等的影响.结果表明,环氧化溶聚丁苯橡胶的加入减缓了复合材料的硫化速率,混炼胶中的结合胶含量增大;溶聚丁苯橡胶/白炭黑硫化胶的定伸应力、耐磨性及回弹性能提高,压缩生热降低,同时硫化胶的抗湿滑性能得到提升、滚动阻力下降.

Abstract

The effect of epoxidized solution poly-merized styrene-butadiene rubber(SSBR)with an epoxy degree of 15%on the processing properties,silica dispersion,physical and mechanical proper-ties,and dynamic mechanical properties of SSBR/silica composite was studied.The results showed that the addition of epoxidized SSBR slowed down the vulcanization rate of the composites,and the content of bound rubber in the rubber compound increased.The tensile stress,wear resistance,and resilience of SSBR/silica vulcanizates were improved,while the compression heat build-up was reduced.At the same time,the wet slip resistance of the vulcanizates was improved,and the rolling resistance was reduced.

关键词

溶聚丁苯橡胶/环氧化/结合胶/白炭黑/硫化特性/物理机械性能/动态力学性能

Key words

solution polymerized styrene-buta-diene rubber/epoxidation/bound rubber/silica/vul-canization characteristics/physical and mechanical property/dynamic mechanical property

引用本文复制引用

出版年

2024
合成橡胶工业
中国石油天然气股份有限公司兰州石化分公司

合成橡胶工业

CSTPCD
影响因子:0.401
ISSN:1000-1255
参考文献量8
段落导航相关论文