合成橡胶工业2024,Vol.47Issue(5) :411-415.DOI:10.19908/j.cnki.ISSN1000-1255.2024.05.0411

硅橡胶绝缘材料表面剥离力预测模型

Prediction model for surface peering force of silicone rubber insulation material

孙其勋 翟晴晴 万小东 王珊 吴仲岿
合成橡胶工业2024,Vol.47Issue(5) :411-415.DOI:10.19908/j.cnki.ISSN1000-1255.2024.05.0411

硅橡胶绝缘材料表面剥离力预测模型

Prediction model for surface peering force of silicone rubber insulation material

孙其勋 1翟晴晴 1万小东 2王珊 1吴仲岿1
扫码查看

作者信息

  • 1. 武汉理工大学材料科学与工程学院,武汉 430070
  • 2. 电网环境保护国家重点实验室,武汉 430047
  • 折叠

摘要

选用室温硫化硅橡胶作为修复材料,分别与4种基底黏合制备成剥离试样,通过构建的材料表面剥离力计算数学模型预测了材料间的剥离力理论值,同时通过剥离力测试获取了不同材料间的剥离力实验值.结果表明,所有试样中剥离力理论值与实验值的相对大小关系一致,并且单一试样的剥离力理论值与实验值的绝对偏差均在1 N以下.该数学模型计算结果能很好地反映不同材料间剥离强度的相对强弱.

Abstract

Room temperature vulcanized silicone rubber was selected as the repair material,and pee-ling samples were prepared with four types of sub-strates.The theoretical values of peel forces between materials were predicted by constructing a mathe-matical model for calculating the peel force on the material surface.At the same time,experimental va-lues of peel forces between different materials were obtained through peel force test.The results indica-ted that the relative size relationship between the theoretical and experimental values of peel force in all samples was consistent,and the absolute devia-tion between the theoretical and experimental values of peel force for a single sample was below 1 N.The calculation results of this mathematical model could reflect the relative strength of peel strength between different materials well.

关键词

硅橡胶/剥离力/数学模型/黏附能/接触角法

Key words

silicone rubber/peel force/mathe-matical model/adhesion energy/contact angle method

引用本文复制引用

基金项目

武汉理工大学襄阳技术转移中心科技产业化资金资助项目(WXCJ-20220010)

电网环境保护国家重点实验室开放基金资助项目(GYW 51202201426)

出版年

2024
合成橡胶工业
中国石油天然气股份有限公司兰州石化分公司

合成橡胶工业

CSTPCD
影响因子:0.401
ISSN:1000-1255
段落导航相关论文