合成纤维工业2024,Vol.47Issue(5) :20-24.

PET/PEI合金的相结构模拟及性能研究

Phase structure simulation and properties of PET/PEI alloy

修浩博 郭承鑫 彭志宏 王朝生 吉鹏 江振林
合成纤维工业2024,Vol.47Issue(5) :20-24.

PET/PEI合金的相结构模拟及性能研究

Phase structure simulation and properties of PET/PEI alloy

修浩博 1郭承鑫 2彭志宏 2王朝生 3吉鹏 3江振林1
扫码查看

作者信息

  • 1. 上海工程技术大学,上海 201620
  • 2. 湖南美莱珀科技发展有限公司,湖南永州 425300
  • 3. 东华大学,上海 201620
  • 折叠

摘要

采用聚对苯二甲酸乙二醇酯(PET)与本征阻燃材料聚醚酰亚胺(PEI)共混、熔融制备PET/PEI合金,基于Materials Studio 7.0软件构建PET/PEI分子模型,进行相结构模拟,研究PET/PEI合金的相容性,并探讨PEI含量对PET/PEI合金力学性能及阻燃性能的影响.结果表明:在任意共混比下PET/PEI合金为互不相容体系,当PEI质量分数为10%时,PET-PEI分子间C—C原子对之间的径向分布函数值为4.09,大于PEI-PEI分子间C—C原子对之间的径向分布函数值,PET/PEI合金相容性相对较好;当PEI质量分数为10%时,PET/PEI合金拉伸强度最高,为47.2 MPa;PET/PEI合金的极限氧指数(LOI)随PEI含量的增加而增大,PEI质量分数为10%时合金的LOI为24.3%,PEI质量分数为15%时合金的LOI为27.0%;PET与PEI相容性不佳,但加入PEI仍能有效改善PET/PEI合金的力学性能和阻燃性能,PEI质量分数为10%时PET/PEI合金相容性较好,力学性能好,同时阻燃性能也得到提升.

Abstract

Polyethylene terephthalate/polyetherimide(PET/PEI)alloy was prepared by blending and melting PET with an in-trinsic flame retardant material of PEI.A PET/PEI molecular model was established using Materials Studio 7.0 software to simu-late the phase structure and study the compatibility of PET/PEI alloy.The influence of PEI content on the mechanical and flame retardant properties of PET/PEI alloy was also investigated.The results showed that PET/PEI alloy was an incompatible system at any blending ratio,and the radial distribution function value of C-C atom pairs between PET-PEI molecules was 4.09 when the PEI mass fraction was 10%,which was higher than the radial distribution function value of C-C atom pairs between PEI-PEI molecules,indicating that the compatibility of PET/PEI alloy was comparatively good;the tensile strength of PET/PEI alloy was maximized as 47.2 MPa when the mass fraction of PEI was 10%;the limit oxygen index(LOI)of PET/PEI alloy increased with the increase of PEI content,and the LOI of the alloy was 24.3%and 27.0%when the PEI mass fraction was 10%and 15%,re-spectively;PET and PEI did not exhibit a satisfying compatility,but the addition of PEI could still improve the mechanical prop-erties and flame retardancy of PET/PEI alloys,and the PET/PEI alloy with 10%PEI by mass fraction possessed a good compati-bility,good mechanical properties and an increasing flame retardancy.

关键词

聚对苯二甲酸乙二醇酯/聚醚酰亚胺/合金/分子动力学模拟/相结构/阻燃性能

Key words

polyethylene terephthalate/polyetherimide/alloy/molecular dynamics simulation/phase structure/flame retar-dancy

引用本文复制引用

基金项目

湖南省科技计划项目(2021RC5032)

出版年

2024
合成纤维工业
中国石化集团巴陵石油化工有限责任公司 中国石化集团公司合成纤维科技情报中心站

合成纤维工业

CSTPCD
影响因子:0.417
ISSN:1001-0041
参考文献量2
段落导航相关论文