芬顿+水解酸化+二级A/O+MBR处理膜生产废水的工程实例
Engineering Example of Fenton+Hydrolysis Acidification+Secondary A/O+MBR Treatment of Membrane Production Wastewater
鲍磊1
作者信息
- 1. 上海中耀环保实业有限公司,上海 200092
- 折叠
摘要
膜生产废水含有的CODcr主要为难生物降解的二甲基甲酰胺(DMF)和二甲基乙酰胺(DMAC),废水的COD.r达13 000 mg/L,TN浓度达1 200 mg/L.针对某企业膜生产废水高CODcr、高TN、难生物降解的特点,采用芬顿氧化+水解酸化的预处理工艺和二级A/O结合MBR的主体处理工艺.根据该工程实例,膜生产废水采用芬顿氧化+水解酸化+二级A/O结合MBR膜的处理工艺,实际运行结果表明,CODcr和TN的总去除效率分别达到99.6％和98.9％,排水指标达到国标GB 18918-2002《城镇污水处理厂污染物排放标准》一级A排放标准.
Abstract
The CODcr contained in membrane production wastewater is mainly dimethylformamide(DMF)and dimethylacetamide(DMAC),which are refractory to biodegradation,and the CODcr of wastewater is 13 000 mg/L,and the TN concentration is 1 200 mg/L.In view of the characteristics of high CODcr,high TN and difficult biodegradation of membrane production wastewater of an enterprise,the pretreatment process of Fenton oxidation+hydrolysis acidification was adopted,and the main treatment process was composed of secondary A/O combined with MBR.According to the project example,the membrane production wastewater is treated by fenton oxidation+hydrolysis acidification+secondary A/O combined with MBR membrane,and the actual operation results show that the total removal efficiency of CODcr and TN is 99.6％and 98.9％respectively,and the drainage index meets the national standard GB 18918-2002 Pollutant Discharge Standards for Urban Sewage Treatment Plants first-class A discharge standard.
关键词
膜生产废水/难生物降解/DMF/DMACKey words
membrane production wastewater/difficult biodegradation/DMF/DMAC引用本文复制引用
出版年
2024
NETL
NSTL
万方数据