中国航空学报(英文版)2024,Vol.37Issue(1) :325-344.DOI:10.1016/j.cja.2023.10.016

PPB structure elimination,DRX nucleation mechanisms and grain growth behavior of the 3rd-generation PM superalloy for manufacturing aviation components

Baoyun ZHANG Yongquan NING Zhaotian WANG Qiaomu LIU
中国航空学报(英文版)2024,Vol.37Issue(1) :325-344.DOI:10.1016/j.cja.2023.10.016

PPB structure elimination,DRX nucleation mechanisms and grain growth behavior of the 3rd-generation PM superalloy for manufacturing aviation components

Baoyun ZHANG 1Yongquan NING 1Zhaotian WANG 1Qiaomu LIU2
扫码查看

作者信息

  • 1. School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China
  • 2. AECC Sichuan Gas Turbine Establishment,Chengdu 610500,China
  • 折叠

Abstract

Previous Particle Boundary(PPB),as the detrimental structure in Powder Metallurgy(PM)components,should be eliminated by subsequent hot process to improve the mechanical properties.The objective is to investigate the Dynamic Recrystallization(DRX)nucleation mech-anisms and grain growth behavior of the 3rd-generation PM superalloy with PPB structure.Microstructure observation reveals that PPB decorated with(Ti,Ta,Nb)C carbides belongs to the discontinuous chain-like structure.The elimination of PPB networks can be achieved effectively via hot deformation due to the occurrence of DRX.Four different DRX nucleation mechanisms were proposed and discussed in detail according to the special microstructure characteristics of the PM superalloy.Firstly,local lattice rotations can be detected in the vicinity of(Ti,Ta,Nb)C carbides during hot deformation and thus PPB structure serves as the preferential nucleation sites for DRX grains via Particle-Stimulated Nucleation(PSN).Then,Discontinuous-DRX(DDRX)characterized by grain boundary bulging dominates the microstructure refinement and Continuous-DRX(CDRX)operated by subgrain rotation can be regarded as an important assis-tant mechanism.At last,the initial ∑3 boundaries would lose their twin characteristics owing to the crystal rotation and then transform into the general High Angle Grain Boundaries(HAGBs).The distorted twins provide additional DRX nucleation sites,viz.,twin-assisted nucleation.Partic-ular attention was focused on the grain growth behavior of the PM superalloy in subsequent anneal-ing process.The recrystallization temperature was determined to be about 1110 ℃ and 1140 ℃ can be considered as the critical temperature for grain growth.The findings would provide theoretical support for microstructure refinement of the 3rd-generation PM superalloy,which is of pivotal sig-nificance for improving the mechanical properties of aviation components.

Key words

PM superalloy/Previous Particle Boundary(PPB)/DRX nucleation/Grain growth/Microstructure refinement

引用本文复制引用

基金项目

National Natural Science Foundation of China(52175363)

National Key Research and Development Program,China(XXXX-KF2019-8-1)

National Key Research and Development Program,China(XX-XX-0015-0087)

出版年

2024
中国航空学报(英文版)
中国航空学会

中国航空学报(英文版)

CSTPCDEI
影响因子:0.847
ISSN:1000-9361
参考文献量56
段落导航相关论文