首页|宽范围负载CL-LDO的设计

宽范围负载CL-LDO的设计

扫码查看
针对规模与功耗骤增的集成电路发展趋势,设计了一种可以提供宽范围负载电流的无片外电容型低压差线性稳压器(CL-LDO).为了解决宽范围负载电流与无片外电容等需求所带来的稳定性问题与瞬态特性问题,提出了动态零点补偿的方式与瞬态增强电路结构,既保障了整体电路在全负载范围内保持稳定,又实现了较好的瞬态特性.基于0.11 μm CMOS工艺,完成电路设计、版图设计与仿真,仿真结果表明,在0~500 mA的负载范围内,整体环路增益可以达到68 dB;最小相位裕度为56°;当负载电流在1~500 mA之间发生跳变时(Δt=500 ns),输出过冲和下冲分别为56 mV和141 mV,建立时间分别为2 μs和0.78 μs;PSR 为-67.2 dB@1 kHz,负载调整率为0.137 μV/mA.
Design of a CL-LDO with Wide Range Load
Aiming at the development trend of integrated circuits(ICs)with rapid increase in scale and power consumption,a novel capacitor-less low-drop-out linear voltage regulator(CL-LDO)has been designed to provide a wide range of load currents.To solve the issues of stability and transient response caused by the requirements of a wide range of load currents and no off-chip capacitor,a dynamic zero-point compensation method and a transient enhancement circuit structure are proposed,which not only ensures the stability of the whole circuit in the full load range,but also achieves excellent transient characteristics.Based on 0.11 μm CMOS technology,the circuit design,layout design and simulation are completed.The simulation results show that the overall loop gain can reach 68 dB with a minimum phase margin of 56° within the load range of 0 mA to 500 mA,the output overshoot and undershoot are 56 mVand 141 mV,and their settling time is 2 μs and 0.78 μs,respectively,when load current transients range from 1 mA to 500 mA(Δt=500 ns),the power supply rejection(PSR)is-67.2 dB@1 kHz,and the load regulation rate is 0.137 μV/mA.

low-drop-out linear voltage regulatordynamic zero-point compensationtransient enhancementwide range load

唐俊龙、关浩、邓欢、李振涛、邹望辉

展开 >

长沙理工大学 物理与电子科学学院,湖南 长沙 410011

湖南毂梁微电子有限公司,湖南 长沙 410008

低压差线性稳压器 动态零点补偿 瞬态增强 宽范围负载

柔性电子材料基因工程湖南省重点实验室开放基金

202015

2024

湖南大学学报(自然科学版)
湖南大学

湖南大学学报(自然科学版)

CSTPCD北大核心
影响因子:0.651
ISSN:1674-2974
年,卷(期):2024.51(8)
  • 3