化学与粘合2025,Vol.47Issue(1) :27-29.

一种TiO2改性石英短切纤维增强磷酸盐复合材料的制备

Preparation of a TiO2-modified Quartz Chopped Fiber Reinforced Phosphate Composite Material

薛金龙 吴易泽 王超 曹先启 李博弘 张广鑫 陈泽明
化学与粘合2025,Vol.47Issue(1) :27-29.

一种TiO2改性石英短切纤维增强磷酸盐复合材料的制备

Preparation of a TiO2-modified Quartz Chopped Fiber Reinforced Phosphate Composite Material

薛金龙 1吴易泽 1王超 1曹先启 1李博弘 1张广鑫 1陈泽明1
扫码查看

作者信息

  • 1. 黑龙江省科学院石油化学研究院,黑龙江哈尔滨 150040
  • 折叠

摘要

针对磷酸盐复合材料对吸波性能的需求,选用纳米TiO2作为功能填料,采用热重(TG)分析、差示扫描量热法(DSC)和扫描电子显微镜(SEM)等表征了填料与磷酸盐复合材料结构,并研究了填料对磷酸盐复合材料的弯曲强度和介电性能的影响规律.研究结果表明:当纳米TiO2用量为7.5%(wt)时,石英短切纤维增强磷酸盐复合材料的介电常数可达到8.52,损耗正切值为0.018,弯曲强度达到132 Mpa,微观结构致密规整.

Abstract

In view of the demand for wave-absorbing properties of phosphate composites,the nano TiO2 is selected as a functional filler,and the thermogravimetric(TG)analysis,differential scanning calorimetry(DSC)and scanning electron microscopy(SEM)is used to characterize the structure of the filler and phosphate composites,and the influence law of the filler on the bending strength and dielectric properties of the phosphate composites is investigated.The results show that when the dosage of nano TiO2 is 7.5%(wt),the dielectric constant of quartz chopped fiber reinforced phosphate composites can reach 8.52,the loss tangent value is 0.018,and the bending strength is 182 MPa,and the microstructure is dense and regular.

关键词

介电常数/TiO2/磷酸盐

Key words

dielectric constant/TiO2/phosphate composites

引用本文复制引用

出版年

2025
化学与粘合
黑龙江省化学学会 黑龙江省科学院石油化学研究院

化学与粘合

CSTPCD
影响因子:0.386
ISSN:1001-0017
段落导航相关论文