计量与测试技术2024,Vol.50Issue(9) :31-33.DOI:10.15988/j.cnki.1004-6941.2024.9.009

基于LDV校准皮托管的扰流影响研究

Revisiting the Impact of Turbulence on Pitot Tube Calibration Through LDV Analysis

扶志勇 周艳 冯得明 朱宁 李宁
计量与测试技术2024,Vol.50Issue(9) :31-33.DOI:10.15988/j.cnki.1004-6941.2024.9.009

基于LDV校准皮托管的扰流影响研究

Revisiting the Impact of Turbulence on Pitot Tube Calibration Through LDV Analysis

扶志勇 1周艳 1冯得明 1朱宁 1李宁1
扫码查看

作者信息

  • 1. 湖南省计量检测研究院
  • 折叠

摘要

基于激光多普勒测速仪对皮托管进行校准时,其探头附近的扰流会影响校准结果,在回流式风洞低速段进行实验研究.结果表明:其探头对流场的干扰会影响该测速仪的测量,而在距离总压孔10mm以上,不同流速的扰流影响可忽略不计.由此可知,校准时,校准的最佳位置应离该总压孔的上游(10~20)mm处.

Abstract

When the pitot tube is calibrated based on the laser Doppler tachometer,the turbulent flow near the probe will affect the calibration result.The experimental study is carried out in the low-speed section of the return flow wind tunnel.The results show that the flow field interference of the probe will affect the measurement of the ta-chometer,and the influence of different flow rates is negligible when the distance from the total pressure hole is more than 10mm.It can be seen that when calibrating,the best position of calibration should be from the upstream(10~20)mm of the total pressure hole.

关键词

LDV/校准/皮托管/扰流

Key words

LDV/calibration/pitot tube/turbulent flow

引用本文复制引用

出版年

2024
计量与测试技术
成都市计量监督检定测试所

计量与测试技术

影响因子:0.175
ISSN:1004-6941
段落导航相关论文