某车型千斤顶固定座处车身钣金撕裂破坏问题与解决
Tearing failure of body sheet metal at fixed seat of certain vehicle jack and its solution
王旭 1谢浩森 1周文超 1韩超 1王涛 1孙佳兴 1石利敏1
作者信息
- 1. 中国第一汽车股份有限公司研发总院,长春 130011
- 折叠
摘要
分析某车型千斤顶固定座处车身钣金撕裂破坏问题,发现在千斤顶固定与限位不充分的情况下,系统振动导致钣金疲劳开裂.设计多种千斤顶固定方案,通过比较筛选确定改进方案.采集试验场载荷谱并进行加速处理,对最终改进方案进行随机振动疲劳分析,结果表明改进方案满足要求,台架试验验证改进方案的有效性.
Abstract
The tearing damage of the body sheet metal at the fixed seat of certain vehicle jack is analyzed,and it is found that the system vibration leads to fatigue cracking of the sheet metal in the case of insufficient of fixing and limiting of the jack.Multiple jack fixing schemes is designed,and the improvement plan is determined by comparison and screening.The load spectrum of the test site is collected and accelerated,and the random vibration fatigue analysis on the final improvement plan is conducted.The results show that the improved plan meets the requirements.The effectiveness of the improved plan is verified by bench testing.
关键词
千斤顶/车身钣金/撕裂破坏/载荷谱/随机振动疲劳/台架试验Key words
jack/body sheet metal/tearing failure/load spectrum/random vibration fatigue/bench test引用本文复制引用
出版年
2024
NETL
NSTL
万方数据