首页|某地下污水厂MBR膜运行效率及工艺控制分析

某地下污水厂MBR膜运行效率及工艺控制分析

扫码查看
近年来缺氧-厌氧-好氧+膜生物反应器(AAO+MBR)工艺在污水处理厂的应用越来越广泛,但广大专家、学者对MBR膜的运行效率、工艺控制研究较少.文中结合武汉市近年来建设的一座 10 万m3/d规模的全地下式污水处理厂的运行经验,对AAO+MBR工艺设计概况、运行效率、工艺控制要点、运行电耗进行研究,尤其对MBR膜的处理效率进行了重点研究.结果表明,MBR膜对进膜污水中的CODCr、氨氮、TN、TP均有一定的降解处理能力,除TN的去除率较低(10%~37%)外,其他污染物指标去除率均可达到 40%以上.其中,氨氮、TN的降解速率影响因素与传统生化处理一致,主要为温度、碳源.研究以期为后续类似项目设计、运行管理提供参考.
Analysis of Operation Efficiency and Process Control of MBR Membrane for an Underground WWTP
In recent years,the AAO+MBR process has been widely used in the wastewater treatment plants(WWTPs),but there are few studies on the operational efficiency and process control of MBR membrane system at home.Based on the operating experience of a 100 000 m3/d underground WWTP built in Wuhan City in recent years,the general situation of AAO+MBR process design,operation efficiency,key points of process control and operation power consumption are studied,especially the treatment efficiency of MBR membrane system is studied emphatically.The results show that the MBR membrane system can degrade CODCr,ammonia nitrogen,TN and TP,and the removal rate of TN is low(10%~37%),the removal rate of other pollutants can reach more than 40%.The factors affecting the degradation rate of ammonia nitrogen and TN are the same as those of traditional biochemical treatment,mainly temperature and carbon source.The research is conducted to provide reference for the similar project design and operation management of follow-up similar projects.

AAO+MBRMBR operation efficiencyunderground wastewater treatment plant(WWTP)energy consumption analysisprocess control

吴明明、周毅、熊珍、张诗雄、陈俊、高芳、刘畅、黄凯

展开 >

中建三局绿色产业投资有限公司,湖北武汉 430100

AAO+MBR MBR运行效率 地下污水厂 电耗分析 工艺控制

2024

净水技术
上海市净水技术学会,上海市城乡建设和交通委员会科学技术委员会办公室

净水技术

CSTPCD
影响因子:0.643
ISSN:1009-0177
年,卷(期):2024.43(5)
  • 9