基于视觉与电弧多信息传感的焊缝跟踪算法
Seam tracking algorithm based on multi-information sensor of vision and arc
胡海林 1李静 2李剑 3徐中路 1朱伟4
作者信息
- 1. 南京航空航天大学计算机科学与技术学院,南京210016
- 2. 华恒焊接股份有限公司,江苏昆山215301;南京航空航天大学计算机科学与技术学院,南京210016
- 3. 南昌陆军学院战斗实验室,南昌330103;南京航空航天大学计算机科学与技术学院,南京210016
- 4. 华恒焊接股份有限公司,江苏昆山215301
- 折叠
摘要
随着焊接传感技术以及信号处理技术的快速发展,人们越来越注重对焊接过程质量控制的研究,而多传感器信息融合技术是焊接质量控制的一种重要的方法,采用该技术实现熔化极气体保护焊(MIG)脉冲焊接质量的自动控制.该技术采用了视觉传感器和电弧传感器将采集的不同的描述信息进行了有效的特征提取和传输,并运用多传感器信息融合算法进行焊缝的跟踪.视觉传感器利用工业电荷耦合元件(CCD)获取图像信息控制焊炬的横向偏差信息,电弧传感器利用数据采集卡获取电流信息控制焊炬的高度互补偏差信息和横向的冗余信息,将两种传感器得到的冗余信息和互补信息在特征层下进行融合实现焊接过程横向和高度的纠偏控制.冗余信息的融合可以实现视觉传感的图像去噪,而互补信息的融合可以进一步提高焊缝跟踪的精度.实验结果表明,所提算法能够较好地提高焊接的质量,从而也验证了算法的有效性和合理性.
Abstract
With the rapid development of weld sensor technology and signal processing technology, more and more researchers begin to pay attention to the research of the welding process quality control. The multi-sensor information fusion technology is an important method for welding quality control. The technology is applied to the automatic control process of MIC pulse welding quality. This paper captured different description information for the effective feature extraction and transmission with the vision sensor and the arc sensor, which used in multi-sensor information fusion algorithm for seam tracking. The vision sensor obtained image information by industrial Charg-Coupled Device (CCD) for the lateral deviation information of the weld torch, the arc sensor obtained current information by data acquisition card for the height complementary deviation information and lateral redundancy information of the weld torch. The complementary and redundant information of two sensors were used to sensor information fusion on feature level for lateral and height deviation control. The redundant information fusion achieved visual image de-noising, while the complementary information fusion can further improve the seam tracking precision. The experimental results show that the proposed algorithm can improve the welding quality, and thus verify its efficiency and rationality.
关键词
MIG脉冲焊/视觉传感器/电弧传感器/多传感器信息融合/焊缝跟踪Key words
MIG pulse welding/vision sensor/arc sensor/multi-sensor information fusion algorithm/seam tracking引用本文复制引用
基金项目
江苏省科技成果专业专项基金资助项目(BA2007058)
出版年
2012
NETL
NSTL
维普
万方数据