La2O3掺杂对微波烧结WC-10AlCoCrFeNi硬质合金微观结构及性能的影响
Influence of La2O3 doping on microstructure and properties of WC-10AlCoCrFeNi cemented carbides sintered by micro wave
付洛辉 1唐思文 2卢继 1高美连 3种鑫鹏 1刘骞3
作者信息
- 1. 湖南科技大学机械设备健康维护湖南省重点实验室,湖南湘潭 411201
- 2. 湖南科技大学机械设备健康维护湖南省重点实验室,湖南湘潭 411201;湖南科技大学深海深地矿产资源开发技术与装备教育部工程研究中心,湖南湘潭 411201
- 3. 湖南科技大学深海深地矿产资源开发技术与装备教育部工程研究中心,湖南湘潭 411201
- 折叠
摘要
采用机械合金化和微波烧结制备了 La2O3掺杂的WC-10AlCoCrFeNi硬质合金,研究了 La2O3含量对WC-10AlCoCrFeNi硬质合金相结构、微观组织和力学性能影响.结果表明:机械合金化制备的高熵合金粉末化学成分均匀,无明显富集现象;La2O3可以降低Al元素氧化程度,细化晶粒,促进裂纹的偏转和桥接;随着La2O3含量的增加,硬质合金的晶粒尺寸先增大后减小,力学性能先升高后降低.当La2O3含量为0.075 mass％时,硬质合金的组织均匀,性能最好,晶粒尺寸达0.44μm,相对密度为95.81％、硬度为 1616.57 HV30、断裂韧性为 13.64 MPa·m1/2、弯曲强度为 1404.05 MPa.
Abstract
WC-10AlCoCrFeNi cemented carbides doped with La2O3 were prepared by mechanical alloying and microwave sintering.The effect of La2O3 content on phase structure,microstructure and mechanical properties of the WC-10AlCoCrFeNi cemented carbides was studied.The results show that the high entropy alloy powder prepared by mechanical alloying has uniform chemical composition and no obvious enrichment phenomenon.La2O3 can reduce the oxidation degree of Al element,refine grain size,and promote crack deflection and bridging.With the increase of La2O3 content,the grain size of the cemented carbides first increases and then decreases,and the mechanical properties first increase and then decrease.When the content of La2O3 is 0.075 mass％,the microstructure of the cemented carbides is uniform and the performance is the best,the grain size is 0.44 μm,the relative density is 95.81％,the hardness is 1616.57 HV30,the fracture toughness is 13.64 MPa·m1/2,and the bending strength is 1404.05 MPa.
关键词
高熵合金/La2O3/硬质合金/微观结构/力学性能Key words
high entropy alloy/La2O3/cemented carbide/microstructure/mechanical property引用本文复制引用
基金项目
国家自然科学基金面上项目(52275424)
湖南省自然科学基金面上项目(2023JJ30257)
湖南省教育厅重点项目(22A0346)
出版年
2024
NETL
NSTL
万方数据