首页|粉煤灰掺量对聚丙烯纤维混凝土黏结性能的影响研究

粉煤灰掺量对聚丙烯纤维混凝土黏结性能的影响研究

扫码查看
为研究聚丙烯纤维混凝土黏结性能改良措施,文中对不同粉煤灰掺量下聚丙烯纤维混凝土黏结性能进行试验分析.试验结果表明,粉煤灰取代率在20%及以下时,聚丙烯纤维拔出时出现滑移硬化,而粉煤灰取代率大于20%时为滑移软化;能量指数PEA、FEA和DEA均随粉煤灰用量增加而表现出前期增长、后期降低的发展趋势,最大值均出现在粉煤灰取代率为 20%处.建议采用20%为粉煤灰取代率,此时,聚丙烯纤维混凝土界面黏结性能达到最佳值.
Study on the Influence of Fly Ash Content on the Bond Property of Polypropylene Fiber Concrete
In order to study the measures to improve the bond properties of polypropylene fiber concrete,the bond properties of polypropylene fiber concrete under different fly ash content were tested and analyzed.The test results show that when the fly ash replacement rate is 20%or below,the polypropylene fiber will slip and harden,while when the fly ash replacement rate is greater than 20%,the polypropylene fiber will slip and soften.With the increase of fly ash consumption,the energy index PEA,FEA and DEA showed a development trend of increasing in the early stage and decreasing in the later stage,and the maximum value appeared at the fly ash replacement rate of 20%.It is recommended to use 20%as the replacement rate of fly ash,when the interface bonding property of polypropylene fiber concrete reaches the best value.

Polypropylene fiberFiber reinforced concreteInterface characteristicsBonding characteristicsFly ash

钟海敏

展开 >

佛山市政通混凝土有限公司,广东 佛山 528000

聚丙烯纤维 纤维混凝土 界面特征 黏结特性 粉煤灰

2024

江西建材
江西省建材科研设计院

江西建材

影响因子:2.247
ISSN:1006-2890
年,卷(期):2024.(9)