首页|考虑精铸变形的涡轮叶片气膜冷却效率灵敏度计算方法研究

考虑精铸变形的涡轮叶片气膜冷却效率灵敏度计算方法研究

扫码查看
原文链接
  • 国家科技期刊平台
  • NETL
  • NSTL
  • 万方数据
精铸加工使得涡轮叶片几何结构与设计之间产生随机性偏差,这一偏差对叶片气膜冷却效率造成不确定性影响.涡轮叶片外形偏差的不确定性是几何层面的小扰动问题.本文通过精铸模拟建立了涡轮叶片精铸变形模型.基于PIV与数值模拟建立了适用于流热耦合计算的Realizable k-epsilon湍流模型,建立了考虑叶片变形的气膜冷却效率灵敏度计算方法,计算了涡轮叶片的气膜冷却效率随吹风比变化的灵敏度.结果表明:涡轮叶片精铸产生的变形越大,对原有气膜冷却效率的损失越大.叶片整体平均形变0.25 mm使得整体气膜冷却效率损失约5%,局部形变如叶尖叶片后缘处的0.70 mm可使叶尖平均气膜冷却效率损失约 8%.由灵敏度分析确定的精铸后气膜冷却效率相对误差较明显,达到了1.62%.
Calculation Method of Turbine Blade Cooling Efficiency Sensitivity Considering Deformation of Investment Casting
The precision casting process results in a random deviation between the turbine blade geometry and the design,which has an uncertain effect on the blade air cooling efficiency.The uncertainty of turbine blade contour deviation is a minor disturbance problem in geometry.A model for deformation in the investment casting of the turbine blade is established by using the investment casting simulation.According to PIV and the numerical simulation,a realizable k-epsilon turbulence model for fluid-heat coupling calculation was established.A sensitivity calculation method of cooling efficiency considering blade deformation was established,and the sensitivity variation of the turbine blade air-cooling efficiency with the blow ratio was calculated.The results show that the greater the deformation of turbine blades is,the greater the loss of the original cooling efficiency.The overall average blade deformation of 0.25 mm makes the overall air-cooling efficiency loss of about 5%,and the local deformation such as 0.70 mm at the rear edge of the blade make the average air-cooling efficiency to be a loss of about 8%.

turbine bladeinvestment casting deformationcfd simulationfilm cooling efficiencysensitivity

尤鑫添、董一巍、刘松、吴超林、郭文、龚雨晗

展开 >

厦门大学 航空航天学院,福建厦门 361102

中国航发四川燃气涡轮研究院,成都 610500

涡轮叶片 精铸变形 CFD仿真 气膜冷却效率 灵敏度

国家科技重大专项国家科技重大专项国家自然科学基金项目福建省自然科学基金项目航空科学基金项目航空科学基金项目福建省中科院STS计划配套院省合作重大项目

J2019-II-0022-0043J2019-VII-0013-0153517054402019J0104420170368001202300030680022022T3071

2024

10.13433/j.cnki.1003-8728.20240023

机械科学与技术
西北工业大学

机械科学与技术

CSTPCD北大核心
影响因子：0.565
ISSN：1003-8728
年,卷(期)：2024.43(7)
  • 22