Experimental Study on Separation of Complex Refractory Iron Oxide Ore in Jingtieshan
For many years,the ore utilization rate of V ore body in Huashugou mining area of Jingtieshan was low.In order to give full play to the ore production capacity of V ore body and ensure the balance of mining relationship between ore bodies in the mining area,the experimental study on the technological conditions of block ore pre-concentration—shaft furnace roasting—magnetic separation—reverse flotation was carried out for the complex and difficult-to-separate V ore body iron oxide ore.Under the condition that the TFe grade of the raw ore is 25.92%,the main minerals hematite(specular)iron ore,limonite and siderite are finely disseminated,and the SiO2 grade of gangue minerals is as high as 40.10%.After pre-concentration and discarding of 13.33%of the lump ore,the reduction roasting was carried out at 650 ℃ for 45-65 min with the mass ratio of reducing agent of 4%,and then two stage grinding-three stage magnetic separation was carried out.After the regrinding of the magnetic separation concentrate,the inhibitor caustic starch and cationic collector YG-328B were added,and the reverse flotation of one roughing,one cleaning and four scavenging at room temperature was carried out.Finally,good indexes of concentrate with TFe grade of 61.06%,SiO2 content of 6.86%and iron recovery of 75.40%have been obtained,which can realize the effective utilization of ore resources in V ore body.
Refractory iron oxide orePre-selection discardingReduction roastingMagnetic separationReverse flotation