基于Moldflow的数码相机前盖塑料成型工艺研究
Research on plastic forming process of digital camera front cover based on Moldflow
刘成娟1
作者信息
- 1. 福州职业技术学院,福建 福州 350108
- 折叠
摘要
文章以某数码相机前盖塑件为研究对象,采用Moldflow和Pro/E软件进行塑料成型工艺研究.利用Moldflow软件完成相机前盖模流仿真,对填充时间和气穴分布、回路冷却介质温度和管壁温度、翘曲变形等参数进行分析,然后使用Pro/E软件进行模具结构设计.基于Moldflow的数码相机前盖塑料成型工艺研究为缩短塑件开发周期,提高制品质量,降低生产成本,增强企业竞争力提供参考.
Abstract
In this paper,the plastic molding process of the front cover of a digital camera is studied by using Moldflow and Pro/E.The mold flow simulation of the front cover of the camera was completed by using Moldflow.The filling time and cavitation distribu-tion,loop cooling medium temperature and tube wall temperature,warping deformation were analyzed.Then Pro/E was used to design the mold structure.The research on the plastic molding process of the front cover of digital camera based on Moldflow provides a refer-ence for shortening the development cycle of plastic parts,improving product quality,reducing production cost and enhancing the competitiveness of enterprises.
关键词
塑料成型工艺/模流分析/Moldflow/Pro/EKey words
injection molding process/mold flow analysis/Moldflow/Pro/E引用本文复制引用
基金项目
2021年福建省中青年教师教育科研项目(JAT210820)
出版年
2024
NETL
NSTL
维普
万方数据