首页|风速和多尘源因素对工作面呼吸带粉尘运移影响研究

风速和多尘源因素对工作面呼吸带粉尘运移影响研究

扫码查看
为研究不同风速和多尘源因素下 6m大采高综采工作面呼吸带粉尘运移情况,基于Fluent数值模拟方法,探究了不同入口风速(1.0 m/s、1.5 m/s、2.0 m/s和 2.5 m/s)对呼吸带高度和人行道处粉尘质量浓度分布的影响,分析了多尘源因素下呼吸带下侧、呼吸带高度、呼吸带上侧及靠近人行道一侧的粉尘质量浓度分布.结果表明:粉尘质量浓度随入口风速的减小而增大;6 m大采高综采工作面通风除尘风速应不低于 2.0 m/s;多尘源因素影响下,采煤机割煤作业时对呼吸带上侧的粉尘浓度影响较大,距煤层壁越近,粉尘浓度越大.
Research on the influence of wind speeds and multi-dust source factors on dust migration in respiratory zone of working face
In order to study the dust migration of the respiratory zone of the 6 m large mining height comprehensive mining face under different wind speeds and multi-dust source factors,the effects of different inlet wind speeds(1.0 m/s,1.5 m/s,2.0 m/s and 2.5 m/s)on the height of the respiratory zone and the dust concentration distribution at the sidewalk were explored based on the Fluent numerical simulation method.The dust concentration distribution on the lower side of the respiratory zone,at the height of the respiratory zone,on the upper side of the respiratory zone and the side near the sidewalk under the condition of multi-dust source factors was analyzed.The results showed that the dust concentration increased when the inlet wind speed decreased.When the mining height of the fully-mechanized mining face was 6 m,the wind speed of ventilation and dust removal should be greater than or equal to 2.0 m/s.Under the influence of multiple dust source factors,the dust concentration on the upper side of the respiratory zone changed greatly when the shearer was cutting coal,which showed that the closer to the coal seam wall,the greater the dust concentration.

wind speedmulti-dust sourcerespiratory zonesidewalkdust distributionlarge mining height

王南、刘仁飞

展开 >

潞安化工集团有限公司,山西 长治 046204

西安科技大学 安全科学与工程学院,陕西 西安 710054

风速 多尘源 呼吸带 人行道 粉尘分布 大采高

陕西省自然科学基础研究计划

2022JQ-408

2024

煤化工
赛鼎工程有限公司(原中国化学工业第二设计院),全国煤化工信息站,全国煤化工设计技术中心

煤化工

CSTPCD
影响因子:0.629
ISSN:1005-9598
年,卷(期):2024.52(3)