首页|无线电波发射功率防爆要求与检测方法

无线电波发射功率防爆要求与检测方法

扫码查看
现行国家标准GB/T 3836.1-2021《爆炸性环境第1部分:设备通用要求》和国际标准IEC 60079-0:2017《Explosive atmospheres-Part 0:Equipment-General requirements》规定无线电发射器的阈功率为无线电发射器的有效输出功率与天线增益的乘积.在无线电波防爆安全发射功率阈值一定的条件下,天线增益越大,无线电发射器的有效输出功率就越小,这将限制通过增大天线增益,提高无线传输距离.因此,有必要对国家标准GB/T 3836.1-2021和国际标准IEC 60079-0:2017中规定的阈功率的正确性进行研究,提出合理的无线电波发射功率防爆要求与检测方法.提出了无线电波防爆安全发射功率与天线增益无关,国家标准GB/T 3836.1-2021和国际标准IEC 60079-0:2017规定的无线电发射器的阈功率是错误的.提出了煤矿井下无线电波防爆安全发射功率阈值应大于16 W,且与天线增益无关;国家标准GB/T 3836.1-2021和国际标准IEC 60079-0:2017规定阈功率不得大于6W,且与天线增益相关,是错误的.提出了无线电波防爆安全性能检测方法——检测无线电发射器输出功率,这既可保证通过检测的防爆无线电设备的防爆安全,又简化了检测方法,更提高了防爆无线电设备的无线电波发射功率,解除了对天线增益的限制,将大大提高煤矿井下防爆无线电设备的无线传输距离.
Explosion proof requirements and detecting methods for radio wave transmission power
The current national standard GB/T 3836.1-2021 Explosive atmospheres-Part 1:Equipment-General requirements and the international standard IEC 60079-0:2017 Explosive atmospheres-Part 0:Equipment-General requirements stipulate that the threshold power of a radio transmitter is the product of the effective output power of the radio transmitter and the antenna gain.Under the condition of a certain threshold for the safe transmission power of radio wave explosion-proof,the larger the antenna gain,the smaller the effective output power of the radio transmitter.This will limit the improvement of wireless transmission distance by increasing the antenna gain.Therefore,it is necessary to study the correctness of the threshold power specified in the national standard GB/T 3836.1-2021 and the international standard IEC 60079-0:2017,and propose reasonable explosion-proof requirements and detection methods for radio wave transmission power.It has been proposed that the safe transmission power of radio waves is independent of antenna gain,and the threshold power of radio transmitters specified in the national standard GB/T 3836.1-2021 and the international standard IEC 60079-0:2017 is incorrect.It is proposed that the threshold for the safe transmission power of underground wireless radio waves in coal mines should be greater than 16 W and independent of antenna gain.The national standard GB/T 3836.1-2021 and the international standard IEC 60079-0:2017 stipulate that the threshold power shall not exceed 6 W,which is incorrect.A method for detecting the explosion-proof safety performance of wireless radio waves has been proposed.The method detects the output power of wireless transmitters.This not only ensures the explosion-proof safety of the detected wireless equipment,but also simplifies the detection method.The method improves the wireless radio wave transmission power of the wireless equipment,removes the limitation on antenna gain,and greatly improves the wireless transmission distance of wireless explosion-proof equipment in coal mines.

mine radio wavesexplosion proof safetyantenna gaintransmission poweroutput powerexplosion proof safety performance detecting

孙继平、彭铭

展开 >

中国矿业大学(北京)人工智能学院,北京 100083

矿井无线电波 防爆安全 天线增益 发射功率 输出功率 防爆安全性能检测

国家自然科学基金面上项目国家重点研发计划项目

520743052016YFC0801800

2024

工矿自动化
中煤科工集团常州研究院有限公司

工矿自动化

CSTPCD北大核心
影响因子:0.867
ISSN:1671-251X
年,卷(期):2024.50(6)
  • 24