首页|基于延时微分的旋转导向工具造斜率预测方法研究

基于延时微分的旋转导向工具造斜率预测方法研究

扫码查看
原文链接
  • 国家科技期刊平台
  • NETL
  • NSTL
  • 万方数据
[目的]旋转导向工具造斜率的准确预测是实现工具精准控制的前提，为掌握旋转导向底部钻具组合造斜率变化规律。[方法]根据工具结构特点，采用欧拉-伯努利梁方程法对复合式旋转导向工具底部钻具组合进行受力分析。通过结合底部钻具几何关系，得到各节工具转角与钻头预钻进偏角计算方法，并将旋转导向工具各节点与钻头间距离作为空间延时周期，最终建立基于延时微分的旋转导向底部钻具组合的造斜率预测模型。该模型综合考虑了工具本身几何尺寸与结构、与地层有关的钻头切削各向异性、钻压以及工具材料及内外径有关的抗弯刚度等参数对造斜率的定量影响。[结果和结论]研究表明:(1)该模型预测结果与斯伦贝谢成熟应用的基于有限元分析的钻具造斜率预测软件仿真结果具有良好的吻合度，预测结果差值均保持在 0。5(°)/30 m以内，符合工程要求。(2)同时该方法还可在钻具姿态测量短节的实际测量数据基础上补偿钻头与测量单元间距带来的测量误差问题，为解决测量盲区提供一种新的途径。基于空间延时微分的造斜率预测方法为旋转导向系统底部钻具组合的结构优化及钻井参数优选提供理论依据和快速分析手段。建立的模型易于仿真和移植，在实际工程应用中可获取较好的实时响应，为基于数字孪生的旋转导向工具研发提供准确的钻具运动模型基础。
Build-up rate prediction of rotary steerable tools based on delay differentiation
[Objective]Accurate build-up rate prediction of rotary steerable tools is a prerequisite to achieve the precise control of tools.In order to grasp the variation law of the build-up rate of the rotary steerable bottom-hole assembly(RSBHA).[Methods]Based on the structural charaeteristics of the tool,the Euler-Bernoulli beam equation method is used to analyz the forces outing on the composite RSBHA.At the same time,the calculation method of the tool deflec-tion angle in different sections and the bit pre-drilling deflection angle was obtained with consideration to the geometric relationship of the bottom-hole assembly,and the distance between the connecting points of rotary steerable tool and bit was taken as the spatial delay period.Finally,a prediction model for the build-up rate of the RSBHA based on delay dif-ferentiation was established.This model comprehensively considers the qualitative influence of parameters,such as the geometric size and structure of the tool itself,the cutting anisotropy of the drill bit related to the formation,the weight on bit,and the bending stiffness related to the tool material and the inner and outer diameters,on the build-up rate.[Results and Conclusions]The study shows that:(1)The predicted results of this model are in good agreement with the simula-tion results of Schlumberger's mature build-up rate prediction software based on the finite element analysis,and the dif-ference between the predicted results is maintained within 0.5(°)/30 m,which meets the engineering requirements.(2)This method can also compensate for the measurement error caused by the distance between the drill bit and the meas-urement unit based on the actual measurement data of the drilling tool attitude gauging nipple,providing a new way to solve the problem of unmeasurable are.This build-up rate prediction method based on spatial delay differentiation provides theoretical basis and rapid analysis means to optimize the structure of RSBHA and the drilling parameters.The established model is easy to simulate and transplant,and can obtain good real-time response in practical engineering ap-plications,which provides an accurate foundation of drilling tool movement model for the development of rotary steer-able tools based on digital twins.

rotary steerable systembottom-hole assemblybuild-up rate predictionmechanical analysisdelay differen-tiation

李飞、张楠

展开 >

西安石油大学 电子工程学院,陕西 西安 710065

中国海油集团测井与定向钻井重点实验室定向钻井分室,陕西西安 710065

西安市油气及新能源开发装备智能化重点实验室,陕西 西安 710065

旋转导向系统 底部钻具组合 造斜率预测 力学分析 延时微分

国家重点研发计划国家自然科学基金企业创新发展联合基金重点项目陕西省重点研发计划陕西秦创原"科学家+工程师"团队项目陕西省技术创新引导专项西安石油大学研究生创新与实践能力培养项目

2023YFC2810900U20B20292024GX-YBXM-5042022kxj-1252024ZC-YYDP-22YCS23213045

2024

10.12363/issn.1001-1986.24.01.0038

煤田地质与勘探
中煤科工集团西安研究院

煤田地质与勘探

CSTPCD北大核心
影响因子：1.079
ISSN：1001-1986
年,卷(期)：2024.52(6)
  • 13