摘要
为促进阿丁枫木材的合理、增值利用,对其木材刨削、砂削、铣削、钻削和开榫5项机械加工性能进行测试和评价.结果表明:阿丁枫木材在刨削加工时进料速度宜采用7m/min,在此条件下刨削试件合格率为40％;在砂削加工时,砂带目数宜采用120目,在此条件下砂削试件合格率为63％;铣削、钻削及开榫的试件合格率分别为100％、23％、100％.阿丁枫木材的综合机械加工性能评分为26.
Abstract
To promote rational and value-added utilization of Altingia chinensis wood,this paper tests and evaluates five mechanical properties:wood planing,sanding,boring,shaping,and mortising.The results showed that the feed rate should be seven m/min during the planning process,and the pass rate of the planning specimen was 40％under this condition.In the process,the mesh size of sand should reach 120.Under these conditions,the qualified percentage of sanding specimens was 63％.The percentages of boring,shaping,and mortising specimens were 100％,23％,and 100％,respectively.The compre-hensive mechanical performance score of Altingia chinensis was 26.
基金项目
南宁树木园优质用材树种科研项目(BB33600114)
维普
万方数据