首页|基于紧凑型Nd∶YAG/PPMgLN模组的561 nm基模激光器

基于紧凑型Nd∶YAG/PPMgLN模组的561 nm基模激光器

扫码查看
本文提出了一种非线性晶体的切角方法,通过切去谐振腔中掺氧化镁周期极化铌酸锂(PPMgLN)晶体输出端面的一角,改变输出端面的激光模式分布,从而实现了稳定的561 nm黄光激光的基模输出。利用有限差分本征模法,仿真出各种切角方案输出端面的激光模式分布,讨论其输出基模的原理,并通过实验测出各方案输出功率随泵浦功率的变化曲线。结果表明,当抽运功率为4。8 W时,实现了最高121 mW的基模输出,光-光转换效率为2。6%,中心波长为560。95 nm,半峰全宽为0。92 nm,3 h内波动性小于1。91%。与已报道的实验结果对比,该实验结果具有更小的结构尺寸,为紧凑型基模激光器提供重要参考。
A 561 nm Fundamental Mode Laser Based on a Compact Nd∶YAG/PPMgLN Module
In this paper,a nonlinear crystal corner-cutting method is proposed to change the laser mode distribution on the output face of the PPMgLN crystal by cutting off a corner of the output face of the PPMgLN crystal in the resonance cavity,so as to realize the stable fundamental mode output of the 561 nm yellow laser.Using the finite-difference eigenmode method,the laser mode distributions at the output end face of various corner-cutting schemes were simulated to discuss the principle of their output fundamental mode,and the change curves of the output power of each scheme with the pump power were measured experimentally.The results show that when the pumping power is 4.8 W,the highest fundamental mode output of 121 mW is realized,with an optical-to-optical conversion efficiency of 2.6%,a central wavelength of 560.95 nm and a full width at half maximum of 0.92 nm,and an instability of less than 1.91%in 3 h.With a smaller structure size compared with the reported experimental results,this experimental result will provide an important reference for compact fundamental mode lasers.

PPMgLN crystal561 nm laserfrequency-doubled crystal tangentfundamental mode output

伍秋林、冯新凯、陈怀熹、陈家颖、马翠坪、梁万国

展开 >

中国科学院福建物质结构研究所,福州 350002

中国福建光电信息科学与技术创新实验室(闽都创新实验室),福州 350108

中国科学院大学,北京 100049

福建农林大学数字经济学院,福州 350028

福建师范大学光电与信息工程学院,福州 350117

福建师范大学物理与能源学院,福州 350117

展开 >

PPMgLN晶体 561 nm激光器 倍频晶体切角 基模输出

2024

人工晶体学报
中材人工晶体研究院

人工晶体学报

CSTPCD北大核心
影响因子:0.554
ISSN:1000-985X
年,卷(期):2024.53(9)