染整技术2024,Vol.46Issue(10) :36-38.

PLA纤维织物清洁染色关键技术

Key technologies of clean dyeing of PLA fiber fabric

盛春英 吕惠雯 于诗辉 张梦杰 田峰 孙沙沙 于琦 刘娜 郭春辉
染整技术2024,Vol.46Issue(10) :36-38.

PLA纤维织物清洁染色关键技术

Key technologies of clean dyeing of PLA fiber fabric

盛春英 1吕惠雯 2于诗辉 3张梦杰 2田峰 2孙沙沙 2于琦 2刘娜 2郭春辉2
扫码查看

作者信息

  • 1. 山东省短流程印染新技术重点实验室,山东 滨州 256617
  • 2. 滨州华纺工程技术研究院有限公司,山东 滨州 256617
  • 3. 华纺股份有限公司技术中心,山东 滨州 256617
  • 折叠

摘要

聚乳酸(PLA)/纤维素类混纺面料低温分散浸染染色工艺一般需要110℃以上的温度.通过环保载体开发,PLA的染色温度降至100℃以下,并且对分散染料没有特定要求.轧染常用的分散染料能够提高PLA纤维染色深度的同时,减少PLA纤维面料强力的损失,提高布面染色牢度.

Abstract

The dyeing temperature of low temperature disperse dip dyeing of PLA/cellulosic blended fabrics is usually above 110℃ .The dyeing temperature of PLA can be reduced to below 100℃ by the development of environment-friendly carriers,and there is no special requirement for disperse dyes.The disperse dyes commonly used in pad dyeing can improve the dyeing depth of PLA fiber,reduce the strength loss of PLA fiber fabrics and improve the fastness of fabrics.

关键词

聚乳酸/染色温度/产业化

Key words

polylactic acid/dyeing temperature/industrialization

引用本文复制引用

出版年

2024
染整技术
江苏苏豪传媒有限公司 江苏省纺织工程学会

染整技术

影响因子:0.28
ISSN:1005-9350
段落导航相关论文