基于混凝-Fenton-A/O联合工艺的环氧树脂生产废水处理研究
Research on the Treatment of Epoxy Resin Production Waste water Based on Coagulation-Fenton-A/O Combined Process
余敏 1蒋莎莎 2王骏3
作者信息
- 1. 浙江秀水环保有限公司,浙江 杭州 310000
- 2. 温岭市环境综合整治事务中心,浙江 台州 317500
- 3. 浙江交科环境科技有限公司,浙江 杭州 310000
- 折叠
摘要
某工业园区的废水原始排放已满足排放标准,但需要满足更严格的纳管要求.为了进一步提高生产废水处理效能,研究采用了混凝-Fenton-A/O联合工艺进行小规模试验.通过对混凝-Fenton-A/O联合工艺处理环氧树脂生产废水指标进行连续检测,出水COD、氨氮、BOD5去除率分别为92.9％、75％、87.7％,出水指标均满足工业废水纳管标准.
Abstract
The original discharge of wastewater in a certain industrial park has met the discharge standards,but it needs to meet stricter management requirements.In order to further improve the efficiency of production wastewater treatment,a small-scale experiment was conducted using the coagulation-Fenton-A/O combined process.Through continuous testing of the indicators of the coagulation Fenton-A/O combined process for treating epoxy resin production wastewater,the removal rates of COD,ammonia nitrogen,and BOD5 in the effluent were 92.9％,75％,and 87.7％,respectively.The effluent indicators all met the industrial wastewater management standards.
关键词
环氧树脂/生产废水/混凝/Fenton/A/O工艺Key words
epoxy resin/production wastewater/coagulation/Fenton/A/O process引用本文复制引用
出版年
2024
NETL
NSTL
万方数据