首页|电镀废水中COD降解方法的分析研究

电镀废水中COD降解方法的分析研究

扫码查看
本文采用单一絮凝法、Fenton氧化法对预处理后的电镀废水作进一步COD降低处理,通过测试处理后废水中COD值发现,相同加量的絮凝剂,FeCl3 对于废水中COD降低率最高为 79.2%,c(H2O2)∶c(FeSO4·7H2O)=4∶1 的Fenton试剂对COD降低率最佳为82.6%.但单一方法未能使水质达标,通过絮凝法和Fenton氧化法联用实验发现,两种方法之间存在较好的协同促进作用,大大提高了废水中COD的降解率,在Fenton试剂作用下,4 种絮凝剂的COD降低率均超过90.0%,为实际生产中电镀废水中COD的处理提供了一定的借鉴依据.
Analysis of COD Degradation Methods in Electroplating Wastewater
In this paper,single flocculation method and Fenton oxidation method are adopted to further reduce COD of pretreatment electroplating wastewater.Through testing the COD value of treated wastewater,it is found that the same amount of flocculant FeCl3 can reduce the COD of wastewater up to 79.2%,and c(H2O2):c(FeSO4·7H2O)=4:1 Fenton reagent has the best COD reduction rate of 82.6%.However,a single method fails to reach the water quality standard.Through the joint experiment of flocculation and Fenton oxidation,it is found that there is a good synergistic deposit effect between the two methods,which greatly improves the degradation rate of COD in wastewater.Under the action of Fenton reagent,the COD reduction rate of the four flocculants exceeds 90.0%.It provides some reference basis for the treatment of COD in electroplating wastewater in actual production.

electroplating wastewaterCODdegradation

阳波

展开 >

深圳市水务工程检测有限公司,广东 深圳 518000

电镀废水 COD 降解

2024

山西化工
山西省煤化工发展促进中心 山西省化工学会

山西化工

影响因子:0.293
ISSN:1004-7050
年,卷(期):2024.44(8)