In order to prevent product deformation,the structure of automobile front bumper was analyzed,the molding mold adoptsed hot runner pouring system.Aiming at the flanging position at both ends of the product,the demoulding mechanism of the cylinder+slider was designed;For the 4 holes on the side of the product,in order to eliminate the slider outline left on the product,the fixed mould slider was used for demoulding;In order to reduce the height of the moving model core,the two ends of the product were extended into the moving template,forming in the moving template;According to the structure of fixed mold and moving mold,design a variety of cooling waterways;Aiming at the problem that the assembly area of the lamp was a closed area and the air could not be discharged to the mold through the exhaust groove,the exhaust hole was set in the position of the parting surface of the lamp in the fixed template,and the air was discharged through the exhaust hole.In order to prevent the push rod top rotten products,for the product surface fluctuation larger position,using the top block ejecting structure;In order to facilitate the disassembly and assembly of the ejector rod,cancel the fixing plate of the ejector rod,fasten the ejector rod to the push plate with bolts.
关键词
汽车保险杠/塑料模具/排气系统/冷却水路/脱模机构
Key words
front bumper of the car/plastic mold/exhaust system/cooling water/stripper mechanism
维普
万方数据