钛工业进展2024,Vol.41Issue(6) :1-6.

Al元素对Ti-Al合金固溶体硬度和室温拉伸性能的影响及其定量建模研究

Research on Effect of Al Element on Hardness and Room Tensile Properties of Ti-Al Alloy Solid Solution and Quantitative Modeling

吴欢 林成 尹桂丽 葛鹏 曾卫东 熊年华
钛工业进展2024,Vol.41Issue(6) :1-6.

Al元素对Ti-Al合金固溶体硬度和室温拉伸性能的影响及其定量建模研究

Research on Effect of Al Element on Hardness and Room Tensile Properties of Ti-Al Alloy Solid Solution and Quantitative Modeling

吴欢 1林成 2尹桂丽 3葛鹏 4曾卫东 5熊年华1
扫码查看

作者信息

  • 1. 西北有色金属研究院,陕西 西安 710016
  • 2. 辽宁石油化工大学,辽宁 抚顺 113001
  • 3. 辽宁工业大学,辽宁 锦州 121001
  • 4. 西部金属材料股份有限公司,陕西 西安 710201
  • 5. 西北工业大学,陕西 西安 710072
  • 折叠

摘要

采用统计拟合法和合金价电子理论计算法研究了Al元素含量对Ti-xAl(x=1、4、6、8,w/%)合金固溶体力学性能的影响.结果表明,随着Al元素含量的增加,Ti-x Al合金硬度和强度均呈现抛物线向上增加的趋势.基于合金价电子理论计算了合金价电子结构参数,建立了Al元素含量对Ti-xAl合金硬度及抗拉强度影响的定量计算关系模型.显微硬度、抗拉强度理论计算值与实验值的误差平均值分别为 4.9631%、6.3520%,二者吻合较好.

Abstract

The effect of Al element content on the mechanical properties of Ti-x Al(x=1,4,6,8,mass fraction,%)alloy solid solutions was studied by statistical fitting method and theoretical calculation method derived from alloy valence electron theory.The results show that with the increase of Al element content,the hardness and strength of Ti-xAl alloy exhibit a trend of parabolic increase.Based on the alloy valence electron theory,the valence electron structure parameters of Ti-x Al alloy are calculated,and the quantitative model of the influence of Al element content on the hardness and tensile strength in Ti-xAl alloy is established.The average error values of micro-hardness and tensile strength are 4.9631%and 6.3520%,respectively,which are in good agreement.

关键词

Ti-xAl合金/固溶体/强度/硬度/统计/定量计算

Key words

Ti-xAl alloy/solid solution/strength/hardness/statistics/quantitative calculation

引用本文复制引用

出版年

2024
钛工业进展
中国有色金属工业协会钛锆铪分会 西北有色金属研究院

钛工业进展

CSTPCD
影响因子:0.2
ISSN:1009-9964
段落导航相关论文